|
| BApoweredXH |
|
||
|
Does anyone know how to disable the abs, and enable the speed sensor on the transmission on a BA falcon. thanks in advance
|
||
| Top | |
||
| TROYMAN |
|
||
|
has to be done via flashing the ecu..
|
||
| Top | |
||
| BApoweredXH |
|
||
|
Do you know if its possible to do it with elm327
|
||
| Top | |
||
| TROYMAN |
|
||
|
no, can only be done by a flash tuner with tuning software, or ford might be able to do it?
|
||
| Top | |
||
| BApoweredXH |
|
||
|
Thanks mate
|
||
| Top | |
||
| SWC |
|
||
|
What BA is this in or is it in the XH?
|
||
| Top | |
||
| Mad2 |
|
|||
|
{USERNAME} wrote: What BA is this in or is it in the XH? i would say the XH grumps |
|||
| Top | |
|||
| TedW |
|
||
|
Attachment: bf wiring5.pdf Attachment: bf wiring3.pdf Attachment: bf wiring2.pdf Attachment: bf wiring1.pdf {USERNAME} wrote: Does anyone know how to disable the abs, and enable the speed sensor on the transmission on a BA falcon. thanks in advance abs requires ford scan tool to alter parameters in pcm to turn off abs- does it have a BA speed sensor in the gear box given that if abs fitted it feeds speed signal via can bus for speedo- attached diagrams are of BF but should be same as BA will show where speed sensor is connected at the PCM connectors - however this also requires can bus circuit from pcm back to instrument cluster-(what instrument cluster ? is it the BA one as this is what speed sensor is matched to if using BA sensor) |
||
| Top | |
||
| BApoweredXH |
|
||
|
its in the xh, and thanks for the diagrams
|
||
| Top | |
||
| BApoweredXH |
|
||
|
the cars got pretty much full ba electrics including the dash will have to get a flash tuner and give it a crack that way, cant see any other way of getting it to work without it
|
||
| Top | |
||
| TedW |
|
||
|
{USERNAME} wrote: the cars got pretty much full ba electrics including the dash will have to get a flash tuner and give it a crack that way, cant see any other way of getting it to work without it diagram 1pdf- connector c13 -top left of diagram -is for without abs -check sender is in transmission ?flash tuner or ford to turn abs off but will still need signal for speedo - and can bus link from PCM to Instruments - |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 33 guests |
