Hi all,

If someone could give me a heads up what to do here that would be great. I'm stuck on the PCV system for the vortech supercharged.
I'll quote instructions:

HELP 1
Source vacuum/boost reference from line going to std. fuel regulator, using T-piece and 4mm hose supplied for Blow of valve. Clamp all ends with fittings supplied.

HELP 2
Fit PCV breather fitting into intake hose, then secure PCV hose with clamp provided. After fitting to supercharger trim to correct length. Use plastic fitting supplied to attach hose to intake pipe.

It has a crap picture showing PCV breather Hose Routing (no help)

Can some one please break this down in layman's terms, sorry for asking this question! I have done everything else

Thanks,
Dan

 

 

Attachments:

File comment: BF XR8 BLOWER DSC02899.jpg [ 189.96 KiB | Viewed 531 times ]

just under the upper plenum throttle body side theres 2 vac fittings in the lower plemun use the front 1 and cut the t piece in there and run that line to the bov

run the breather hose from the passengers rocker feed it uner the head light and put it into the intake pipe
thats how mine is done

Thanks for that ! I decided that I'll just put a little filter on the rocker....thats ok hey. I don't need to run whatever comes out of the rocker back into the sc. Is this true, just gotta call from anther mate saying this?

Thanks again mate, appreciate the help.

i guess that could work havent tried it myself
ithink you have to do something fro thr pcv to prevent the blower boosting the crankcase or something to that effect
either way that us know how it goes

Hey its running fine, there seems to be no problems. Just some minor worries, the belt and the oil. The oil is about 1/8 on the dip stick o yeah mines a v3 also. And that idle pulley near the power steering is right on the edge, ill be crossing my fingers when its on the dyno it docent come off. Other than that shes running great, its only a 6psi system hope I get some nice power out of her.

Good read here Chickenman on PCV Bypass, looks like ill just clean mine from time to time.

https://docs.google.com/viewer?a=v&q=ca ... hQ1J_OUTLA

I know this is a really old thread but im having problems with the same thing ..could any of yous put a few pics up of this?? I have the breather hose thats flared at one end and the metre long 10mm hose they gave me..where does that go?? And i got this small peice of intake pipe that they gave me ..is that the intake pipe that goes to the charger and down to the pod? Do i put the hose into there?