|
| ranga83 |
|
||||
|
ef factory workshop manual and the au factory workshop manual. journals are the same size
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||||
| Top | |
||||
| Disco Frank |
|
|||
|
WTF??? i have been told sooo many times they will not fit
even by a cam manufacturer ?? serious ohh well cool 
_________________ RIP SCOTT |
|||
| Top | |
|||
| MAD |
|
|||
|
I think people might have gotten confused with the Base circle diameter of the cam lobe being larger in the AU
|
|||
| Top | |
|||
| ranga83 |
|
||
|
Base circle in the au is smaller. 1.8" vs 2.1" for e series. I was thinking they had it confused with the crank mains.
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| MAD |
|
|||
|
ranga83 wrote: Base circle in the au is smaller. 1.8" vs 2.1" for e series. I was thinking they had it confused with the crank mains. You sure on that? I was sure I'd read it was larger on AU.My logic also agrees with it, but perhaps my logic is wrong, or missing some detail.... With a lower ratio rocker it would require a large base circle to keep the HLA's in contact with the valve tip. (this is assuming HLA's are same length, and no major changes in geometry of the rocker arm apart from length beyond the pivot) |
|||
| Top | |
|||
| ranga83 |
|
||
|
Im positive. Thats how i measure them to tell the difference when i get regrinds 2nd hand.
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| ahmedkayihan |
|
||
Age: 33 Posts: 123 Joined: 21st Mar 2011 Ride: four wheels and an engine Location: right over there... |
ok so can i put my cam in
 
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 48 guests |
