|
| ef_falcon_95 |
|
|||
|
Hi all ,
I picked up a xh xr6 and the pedal box has cracked around the clutch pedal pin . wondering if its the same as e-series where the dash needs to be removed to take out the pedal box ? Thanks
_________________ El XR6 Turbo |
|||
| Top | |
|||
| snap0964 |
|
|||
|
Pretty much, you just need to pull it backwards a way, so you can access the top three bolts.
Good thing is the dash is lighter than the EF/EL dashes.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
Thanks mate shouldn't be too hard to do .
_________________ El XR6 Turbo |
|||
| Top | |
|||
| snap0964 |
|
|||
|
Nah, it's not.
If you envisage having to remove the pedalbox a few times, you can make them a two piece post1415157.html .
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
That's a good idea, I'm hoping to only pull it out once and weld it up so it will never fail again. Cheers
_________________ El XR6 Turbo |
|||
| Top | |
|||
| snap0964 |
|
|||
|
Here's hoping.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 55 guests |
