|
| Hectic_xr6 |
|
||
Age: 38 Posts: 5 Joined: 3rd Jul 2015 Ride: BF XR6 N/A engine with turbo Location: Mildura |
Hi all, had a mate come around and do a compression test on my engine. Car runs fine, just a little more blowby than i thought was right. Results are.. 1. 245, 2:200, 3:210, 4:240, 5:210, 6:240
Test was done with throttle body closed if that makes a difference. Bf na engine
_________________ BF XR6 N/A engine with turbo. Process west tb relocation, custom intercooler piping, Garrett GT3582r, 3 1/2 dump pipe with separate wastegate pipe, 80lb deka injectors, underdrive pulley kit, battery relocation. Still using standard diff and ZF gearbox. 245rwkw and 725nm of torque on 8psi |
||
| Top | |
||
| creeture3 |
|
||
|
Quote: Test was done with throttle body closed if that makes a difference. Usually comp test is done with WOT. #2 is down a bit, should really be within 10% of each other. Pour a teaspoon oil into the cyl., if comp goes up, rings. no change, valves. |
||
| Top | |
||
| Hectic_xr6 |
|
||
Age: 38 Posts: 5 Joined: 3rd Jul 2015 Ride: BF XR6 N/A engine with turbo Location: Mildura |
Yeah i thought so. Ok I'll give it a go and see what happens during the week, car runs perfectly though.
_________________ BF XR6 N/A engine with turbo. Process west tb relocation, custom intercooler piping, Garrett GT3582r, 3 1/2 dump pipe with separate wastegate pipe, 80lb deka injectors, underdrive pulley kit, battery relocation. Still using standard diff and ZF gearbox. 245rwkw and 725nm of torque on 8psi |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 67 guests |