My whipers and radio and ac doesn't work when the car is running uve herd its the ignition barrel and the back being lose but the back isn't even lose any help?

Hello,

It will be wear in the ignition switch. Most seem to do it with age. Try turning it back a bit after you start the engine, it works on my EL. What you could do is run a relay from the Ignition on to power the Accessories. I was always going to do that on my EL.

Hello,

To do this you will need a normal 4 pin relay. Pin 87 goes to Power, can be the cable to the switch. Pin 30 goes to Accessories. Pin 86 goes to Ground, and pin 85 goes to Ignition. When the Ignition is on, you will have power to the Accessories. Take off the battery lead before you start, and make sure the connections are good and well insulated. Other than the ground, the 3 Cables can be connected to the Ignition switch harness. If you replace it later, you wont have hacked up the harness in your Car.