Fordmods Logo

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

AU injectors into EF. 

 

Page 2 of 2 [ 27 posts ] Go to page Previous  1, 2

Post New Topic Post Reply  Previous topic Next topic
 
SWC
 Post subject: Re: AU injectors into EF.
Posted: Sun Feb 07, 2016 3:05 pm 
Technical Contributor
Offline

Age: 67

Posts: 6815

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia
If the revs are fluctuating when the AC kicks on and off, I would say that you have an issue with the ISC.

Have you checked the TPS?
Top
 Profile  
 
 
Damoo
 Post subject: Re: AU injectors into EF.
Posted: Sun Feb 07, 2016 3:10 pm 
Smokin em up
Offline

Age: 33

Posts: 276

Joined: 27th Jun 2007

Location: Melbourne
VIC, Australia
SWC wrote:
If the revs are fluctuating when the AC kicks on and off, I would say that you have an issue with the ISC.

Have you checked the TPS?


ISC and TPS have been replaced with new ones, and I cleaned out the ISC holes it mounts to on the throttle body.
Top
 Profile  
 
 
5h4dy
 Post subject: Re: AU injectors into EF.
Posted: Sun Feb 07, 2016 3:49 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 445

Joined: 8th Jul 2009

Gallery: 2 images

Ride: BA MKII XR6

Location: Waikato
New Zealand
SWC wrote:
If the revs are fluctuating when the AC kicks on and off, I would say that you have an issue with the ISC.

Have you checked the TPS?


Or possibly the idle circuit in the ECU?
Top
 Profile  
 
 
rod hansen
 Post subject: Re: AU injectors into EF.
Posted: Sun Feb 07, 2016 8:52 pm 
Stock as a Rock
Offline

Age: 71

Posts: 146

Joined: 4th Feb 2016

Location: australia
VIC, Australia
Damoo wrote:
SWC wrote:
If the revs are fluctuating when the AC kicks on and off, I would say that you have an issue with the ISC.

Have you checked the TPS?


ISC and TPS have been replaced with new ones, and I cleaned out the ISC holes it mounts to on the throttle body.
Mate the first thing you should have checked when you started the engine was manifold vacuum, a stock engine with good manifold vacuum would be around 20 inches of mercury and the map sensor would be sitting around 100htz, you have probably got around 12 inches and the map is sitting on 130htz and running rich. The idle speed control motor is probably chasing its tail, you have to learn how to check things , don't be a parts changer.
Top
 Profile  
 
 
Damoo
 Post subject: Re: AU injectors into EF.
Posted: Mon Feb 08, 2016 4:02 pm 
Smokin em up
Offline

Age: 33

Posts: 276

Joined: 27th Jun 2007

Location: Melbourne
VIC, Australia
rod hansen wrote:
Damoo wrote:
SWC wrote:
If the revs are fluctuating when the AC kicks on and off, I would say that you have an issue with the ISC.

Have you checked the TPS?


ISC and TPS have been replaced with new ones, and I cleaned out the ISC holes it mounts to on the throttle body.
Mate the first thing you should have checked when you started the engine was manifold vacuum, a stock engine with good manifold vacuum would be around 20 inches of mercury and the map sensor would be sitting around 100htz, you have probably got around 12 inches and the map is sitting on 130htz and running rich. The idle speed control motor is probably chasing its tail, you have to learn how to check things , don't be a parts changer.


Only started doing it after I changed the injectors for the AU ones.
Top
 Profile  
 
 
SWC
 Post subject: Re: AU injectors into EF.
Posted: Mon Feb 08, 2016 6:22 pm 
Technical Contributor
Offline

Age: 67

Posts: 6815

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia
Check your air temp sensor, just under the Throttle Body hesd side.
Top
 Profile  
 
 
Damoo
 Post subject: Re: AU injectors into EF.
Posted: Tue Feb 09, 2016 8:25 am 
Smokin em up
Offline

Age: 33

Posts: 276

Joined: 27th Jun 2007

Location: Melbourne
VIC, Australia
SWC wrote:
Check your air temp sensor, just under the Throttle Body hesd side.


Any particular thing I should be checking, voltages etc?
Top
 Profile  
 
 
SWC
 Post subject: Re: AU injectors into EF.
Posted: Tue Feb 09, 2016 9:17 am 
Technical Contributor
Offline

Age: 67

Posts: 6815

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia
Just check to make sure it is connected or not damaged.

If you need, I have a couple of spares here.

When we put the AU motor in the Wagon, we used the wiring loom that was with it (EL Loom) but the original owner had cut off the plug for the air temp sensor and forgot to tell me. It was giving a bad idle and using excess fuel.

We soldered on a new one and it was perfect straight away.

Worth a check.
Top
 Profile  
 
 
Damoo
 Post subject: Re: AU injectors into EF.
Posted: Wed Feb 10, 2016 10:16 am 
Smokin em up
Offline

Age: 33

Posts: 276

Joined: 27th Jun 2007

Location: Melbourne
VIC, Australia
Yep its certainly connected, the connector seems to be located into its locking tags too.
Top
 Profile  
 
 
Damoo
 Post subject: Re: AU injectors into EF.
Posted: Thu Feb 11, 2016 9:37 am 
Smokin em up
Offline

Age: 33

Posts: 276

Joined: 27th Jun 2007

Location: Melbourne
VIC, Australia
Maybe it just needs to be tuned, I've got a J3 sitting here doing nothing.
Top
 Profile  
 
 
TROYMAN
 Post subject: Re: AU injectors into EF.
Posted: Thu Feb 11, 2016 10:43 am 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia
It shouldnt need to be tuned.. have you thought that there might be an issue with the injectors? ..
There could be a couple of lazy or internally leaking injectors..
You say they were exchange. Are they reco exchange. Bodgy home cleaned ebay specials or professionally reco flow matched injectors?
Top
 Profile  
 
 
Damoo
 Post subject: Re: AU injectors into EF.
Posted: Thu Feb 11, 2016 11:48 am 
Smokin em up
Offline

Age: 33

Posts: 276

Joined: 27th Jun 2007

Location: Melbourne
VIC, Australia
Reco injectors from Bursons, some AZNEW brand, on exchange basis, they cost about $600 for the set.

I've been trying to get new genuine AU ones out of Bosch but they've been on order for 6 months and no ETA for delivery.
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 2 of 2  [ 27 posts ]  Go to page Previous  1, 2
Jump to:  

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Who is online

Users browsing this forum: No registered users and 85 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
cron

 

 

It is currently Sat Nov 23, 2024 5:49 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names