Fordmods Logo

Ba falcon windscreen wipers 

 

Page 1 of 1 [ 4 posts ] 

 
 Post subject: Ba falcon windscreen wipers
Posted: Tue Mar 08, 2016 5:12 pm 
Fordmods Newbie
Offline

Posts: 7

Joined: 18th Feb 2016

Location: Mount Isa
QLD, Australia

Okay guys so I went to use my windscreen wipers today and they didn't work I have checked all the fuses and they are all okay and there is no sound of the washer bottle pump or the wiper motors when I move the leaver so I'm not sure what the go is..... Does anybody have a clue as to what this could be?
Top
 Profile  
 
 
 Post subject: Re: Ba falcon windscreen wipers
Posted: Wed Mar 09, 2016 6:45 am 
Getting Side Ways
Offline

Posts: 496

Joined: 14th Sep 2011

Ride: BF II Gas Ute

Location: Canberra
ACT, Australia

Hello,

Does the Radio work ? Lift the wipers the Windscreen, and swap the fuse with another of the same colour. The ignition may be worn, the radio also runs from accessories. This will eliminate it as a cause. Wipers can stick to the glass on hot days, and a fuse may be bad without looking faulty. Different values are different colours.Swap it with the same colour and see what happens.

 

_________________

Regards 96ELGli

Top
 Profile  
 
 
 Post subject: Re: Ba falcon windscreen wipers
Posted: Wed Mar 09, 2016 10:27 am 
Fordmods Newbie
Offline

Posts: 7

Joined: 18th Feb 2016

Location: Mount Isa
QLD, Australia

Yeah mate radio works and do you know which fuse it is in the panel?
Top
 Profile  
 
 
 Post subject: Re: Ba falcon windscreen wipers
Posted: Thu Mar 10, 2016 11:29 pm 
Fordmods Newbie
Offline

Age: 45

Posts: 3

Joined: 10th Mar 2016

Ride: Ford Falcon BA /Teritory

Location: Adelaide
SA, Australia

Hi. I had almost same problem. Wipers work good, and suddenly stop to work. Checked all installation, and everything look OK. And what was problem: driver wiper stuck in axle. Still do not how that happened, but it was stuck ( axle in housing ). So remove all plastic cover, disconnect wires, unscrew main screws and took all mechanism out. Tools: hammer, gas torch, big pliers, battery drill and good thin oil-who using with gas tools, nail gun etc. Take care with hammer, do not use a lot, just hit on strong part of small arm of that mechanism to start to move, use together with gas torch. Need a good heat to start loose ( you know metals are bigger if heating ). When is start little moving, use pliers to continue moving and oil. Do not combine oil and torch. On the end put axle of wipers in drill and turn on, to spinning for 10-15 min, and use more oil.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 4 posts ] 

Who is online

Users browsing this forum: Google Adsense [Bot] and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 23, 2024 1:58 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names