|
| glenrowan00 |
|
||
|
I have a 2003 ba 6 cyl.falcon I need a centre tailshaft mount rubber bush .there are two sizes 30mm and35mm. which one do I need? help
|
||
| Top | |
||
| 96ELGli |
|
||
|
Hello,
It should be the smaller size, the larger one is V8 and Turbo. Check the Vin with a dealer, it will come with the bearing. E Bay has them for around $65.
_________________ Regards 96ELGli |
||
| Top | |
||
| RtvNut |
|
||
|
the "larger one is V8 and turbo" isnt a guarantee, I've seen XR8's with both sizes, and poverty pack 6's with them too
the difference is if you have a uni joint or CV in the middle of the tailshaft, but I cant remember which is which |
||
| Top | |
||
| SWC |
|
||
|
{USERNAME} wrote: the "larger one is V8 and turbo" isnt a guarantee, I've seen XR8's with both sizes, and poverty pack 6's with them too the difference is if you have a uni joint or CV in the middle of the tailshaft, but I cant remember which is which 30mm is used with the Uni Joint 35mm is used with the CV Joint. If it is a non Turbo/Non V8 it "should" be the 30mm unit but better to check as what RtvNut can happen. CBC Bearings also carry them. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 39 guests |