|
| billy93 |
|
||
|
Hello everyone, pulled everything off my eb motor ready to swap all the intake/ ignition system over due to a f**k head on the burnout car. When doing this I noticed that the ef has a wire running into the timing case (im guessing for a sensor of some sort?) And the eb does not have this, I am wondering if I still need this wire to be connected once I put the motor back into the ef or if it will start and run fine without it?? Any help appreciated thanks guys
Quote: limiter bash gets the gash
 |
||
| Top | |
||
| SWC |
|
||
|
That wire would be for the Crank Angle Sensor and yes you will need that.
You will need to fit the EF Timing Case to the EB Motor to mound the Crank Angle Sensor. |
||
| Top | |
||
| billy93 |
|
||
|
Well thats not what I wanted to hear. But thanks mate, so it will all work the same once I swap the timing case?
|
||
| Top | |
||
| SWC |
|
||
|
Yes.
When you fit the Cam Sensor to the EB Bolck, remove the gear and from the EB Dizzy and fit it to the EF Sensor so that the gears match with the Aux Gear. |
||
| Top | |
||
| billy93 |
|
||
|
Im planning on swapping the eb dizzy out with the ef electronic one, do you mean after I do this or?
|
||
| Top | |
||
| SWC |
|
||
|
billy93 wrote: Im planning on swapping the eb dizzy out with the ef electronic one, do you mean after I do this or? You need to take the drive gear from the dizzy and fit it to the cam sensor so that both gears, Cam sensor and Aux Drive Gear (inside motor) match (original EB). |
||
| Top | |
||
| Tommo52 |
|
|||
|
Sorry for the hijack Billy93.
SWC wrote: You need to take the drive gear from the dizzy and fit it to the cam sensor so that both gears, Cam sensor and Aux Drive Gear (inside motor) match (original EB). This is just for consistency's sake right, so you don't have uneven wear on the aux shaft gear? The dimensions and teeth of the EF synchroniser gear and EA-ED, EL dizzy are the same yeah?
_________________ I've never liked Trees since, not one. |
|||
| Top | |
|||
| SWC |
|
||
|
Tommo52 wrote: SWC wrote: You need to take the drive gear from the dizzy and fit it to the cam sensor so that both gears, Cam sensor and Aux Drive Gear (inside motor) match (original EB). This is just for consistency's sake right, so you don't have uneven wear on the aux shaft gear? It is so the gears match. Chinese dizzies have hard gears and wear the Aux Shaft Gear. Bit like using matching gears for the diff. The dimensions and teeth of the EF synchroniser gear and EA-ED, EL dizzy are the same yeah? Aux shafts are the same from EA to AU. Drives gears on the EA-ED/EL Dizzy, EF Cam Sensor and the AU Oil Drive are all the same. |
||
| Top | |
||
| Tommo52 |
|
|||
|
Thanks SWC.
You're a wealth of information!
_________________ I've never liked Trees since, not one. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 46 guests |
