|
Robert_au |
|
|||
|
Hi guys
Is it worth the $$$ adding a surge tank to my car even if only for extra safety to help prevent lean outs and fuel starvation under boost and hard acceleration? i do have a habit of running the tank down to 1/4 tank or less sometimes. i do in the future plan on winding up the boost, as to how far I'm not sure yet. any other pros and cons other than the obvious 2 pumps to go wrong? i plan on if i do this, having the Surge tank engine bay mounded, with the sway bar mount bolts near the fire wall.
_________________ Current Ride |
|||
Top | |
SWC |
|
||
|
What work have you done to the engine and what RWkW are you looking at?
|
||
Top | |
Robert_au |
|
|||
|
SWC wrote: What work have you done to the engine and what RWkW are you looking at? at the moment stock so cant push too far. other than larger cooler, TB relocation .70 front housing soon to be ported rear, dump pipe +cat and custom piping, down the track i would like to aim for the 350rwkw+. i also have a new fuel rail and reg to go on and some bigger injectors.
_________________ Current Ride |
|||
Top | |
SWC |
|
||
|
Surge tank should be mounted near the fuel tank (most on the chassis rail).
If you mount it in the engine bay you will warm the fuel which you don't want and also you will have a fire hazzard/risk. In NSW you wouldn't pass a Roadworthy with the surge tank mounted in the Engine Bay. http://www.ebay.com.au/itm/BA-BF-FG-For ... SwnipWZ611 http://www.ebay.com.au/itm/BA-BF-FG-For ... SwfZ1WZ7HG http://www.ebay.com.au/itm/BA-BF-FG-For ... SwnipWaM4L http://www.ebay.com.au/itm/BA-BF-FG-For ... SwfZ1WaMb4 http://www.ebay.com.au/itm/BA-BF-FG-For ... SwcBhWaMIE http://www.ebay.com.au/itm/BA-BF-FG-For ... SwcBhWaLHY |
||
Top | |
Robert_au |
|
|||
|
SWC wrote: Surge tank should be mounted near the fuel tank (most on the chassis rail). If you mount it in the engine bay you will warm the fuel which you don't want and also you will have a fire hazzard/risk. In NSW you wouldn't pass a Roadworthy with the surge tank mounted in the Engine Bay. http://www.ebay.com.au/itm/BA-BF-FG-For ... SwnipWZ611 http://www.ebay.com.au/itm/BA-BF-FG-For ... SwfZ1WZ7HG http://www.ebay.com.au/itm/BA-BF-FG-For ... SwnipWaM4L http://www.ebay.com.au/itm/BA-BF-FG-For ... SwfZ1WaMb4 http://www.ebay.com.au/itm/BA-BF-FG-For ... SwcBhWaMIE http://www.ebay.com.au/itm/BA-BF-FG-For ... SwcBhWaLHY Thanks SWC you have given me some food for thought, how do people get away with them styles there? I'm sure there would be some running them. i was thinking one of these tanks http://www.ebay.com.au/itm/172203724271 ... EBIDX%3AIT with one of these fuel pumps http://www.ebay.com.au/itm/400545460324 ... EBIDX%3AIT
_________________ Current Ride |
|||
Top | |
SWC |
|
||
|
Consider your mounting position.
Tanks I listed are mounter on the chassis rail out of the way. The one you have shown looks like it would need to be mounted in the boot area. As for engine bay mounted tanks, I have never seen one but not to say it isn't done. |
||
Top | |
Robert_au |
|
|||
|
SWC wrote: Consider your mounting position. Tanks I listed are mounter on the chassis rail out of the way. The one you have shown looks like it would need to be mounted in the boot area. As for engine bay mounted tanks, I have never seen one not to say it isn't done. the tanks you have listed do look to be the better method to be honest with all mounting holes already there to go and a slightly lesser volume of fuel sitting up the front 1.9L as apposed to nearer 4L with the tank i showed. The one i listed somewhere in the listing says it can be engine bay mounted, i would likely have made up a plate to mount like the Proflow unit. I think if i go for the tank i will be going for the Proflow one. Thanks again swc
_________________ Current Ride |
|||
Top | |
SWC |
|
||
|
Just checked the Proflow site http://www.proflow.com.au/catalog/5425?prodtype=1 and they say that the ones I listed are egine bay mount.
|
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 9 guests |