Fordmods Logo

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

EF falcon drive belt not sitting properly 

 

Page 1 of 1 [ 6 posts ] 

Post New Topic Post Reply  Previous topic Next topic
 
philly
 Post subject: EF falcon drive belt not sitting properly
Posted: Sun Aug 07, 2016 7:17 pm 
Fordmods Newbie
Offline

Posts: 4

Joined: 7th Aug 2016

Ride: EF xr6 wagon

Location: Melbourne
VIC, Australia
Hey guys, I noticed my drive belt was sitting a few mm off my water pump pulley, I replaced my harmonic balancer thinking that it was causing it to be misaligned however after replacing it, the belt still doesnt sit right. Any one have any ideas? :?:

http://imgur.com/a/d4XXJ

Car is a 1994 ef xr6
Top
 Profile  
 
 
voids
 Post subject: Re: EF falcon drive belt not sitting properly
Posted: Sun Aug 07, 2016 8:58 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 1104

Joined: 10th Nov 2004

Gallery: 10 images

Ride: Isuzu MU-X ,2018 Kia Cerato

Location: Mackay
QLD, Australia
it does look a few mil out, have you removed the belt and checked for any play in the idelers or other pulleys?

 

_________________

'96 DF II LTD 6cy
'15 Isuzu MUX LST
Top
 Profile  
 
 
philly
 Post subject: Re: EF falcon drive belt not sitting properly
Posted: Wed Aug 10, 2016 8:57 pm 
Fordmods Newbie
Offline

Posts: 4

Joined: 7th Aug 2016

Ride: EF xr6 wagon

Location: Melbourne
VIC, Australia
Yeah, i just did then, couldnt find anything wrong, I replaced the tensioner with the one off my el parts car just for safe measure and still out.
Top
 Profile  
 
 
Mad2
 Post subject: Re: EF falcon drive belt not sitting properly
Posted: Wed Aug 10, 2016 9:11 pm 
Fordmods Junkie
Offline
User avatar

Posts: 3967

Joined: 22nd Jan 2009

Ride: '03 BA & '06 BF Wagooons

Location: Geeelong
VIC, Australia
is the water pump pulley sitting correctly?
Top
 Profile  
 
 
snap0964
 Post subject: Re: EF falcon drive belt not sitting properly
Posted: Thu Aug 11, 2016 2:11 am 
Technical Contributor
Offline
User avatar

Age: 60

Posts: 5659

Joined: 14th Jan 2005

Gallery: 10 images

Ride: 96 XH/97 EL

Location: South Coast
NSW, Australia
Make sure the tensioners you're using don't have a gap ( > roughly 1 mm or so) between the fixed part and the movable part - some have a tendency over time to separate, causing the belt to misalign.

 

_________________

96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl
97 EL Futura S/W: LPG, Alarm, LED int Lts, Trip Comp, F/Lane Dome Lt, Climate Ctrl, T5 Conversion
Top
 Profile  
 
 
shaddoweaver
 Post subject: Re: EF falcon drive belt not sitting properly
Posted: Mon Aug 15, 2016 5:46 pm 
Oompa Loompa
Offline
User avatar

Age: 60

Posts: 27

Joined: 25th Feb 2012

Gallery: 11 images

Ride: 1994 ED XR6 1994 KJ ll Laser

Location: Capalaba
QLD, Australia
yes as snap0964 says, check the tensioner. the idler pulleys may seem fine but the pivot point wears causing the belt to be misaligned. it happened to me on my el futura,
cheers, shaddoweaver :)

 

_________________

Metal Maniac Can't Go Fast Enough
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 1 of 1  [ 6 posts ] 
Jump to:  

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Who is online

Users browsing this forum: No registered users and 60 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 22, 2024 11:03 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names