|
| Moran |
|
|||
|
I just bought a 1999 Fairmont with smart shield and it only has 1 ignition key how do I go about getting an new one cut / programmed for car.
Do I have to take it to a Ford dealer if so what is the cost involved?
_________________ Factory Specifications are Optional |
|||
| Top | |
|||
| joolz |
|
|||
|
Dont you mean smart lock? you do as far as i know have to go to ford for a new key. they may program the pad there for you.
|
|||
| Top | |
|||
| Moran |
|
|||
|
Its a late Series 1 Update model 10/99
Smartshield was added 30th of march 1999 onward its definately a smartshield model
_________________ Factory Specifications are Optional |
|||
| Top | |
|||
| joolz |
|
|||
|
ah ic, i cant help you sorry. best bet would be to talk to a ford dealer in spares!
|
|||
| Top | |
|||
| Moran |
|
|||
|
Ok I just got off phone from Jefferson Fords Service Dept.
$205 in total for key/cutting/ and programming I am going to phone around see if I can find it any cheaper.
_________________ Factory Specifications are Optional |
|||
| Top | |
|||
| fps |
|
||
|
Moran
I am in the same boat with a BA Futura. Did you obtain any further information re having the second key programmed. Cheers Tony |
||
| Top | |
||
| Moran |
|
|||
|
{USERNAME} wrote: Moran
I am in the same boat with a BA Futura. Did you obtain any further information re having the second key programmed. Cheers Tony No not yet I was waiting untill I register car then I will look in to it further I will let you know If I find it cheaper.
_________________ Factory Specifications are Optional |
|||
| Top | |
|||
| Moran |
|
|||
|
I talked to Rex Gorell Ford in Geelong today they said it would be around $200 but the guy said it would be much cheaper to buy key from locksmith then take it to dealer and pay $42 to have it programmed.
I now need to get quotes from lock smith
_________________ Factory Specifications are Optional |
|||
| Top | |
|||
| dazzar |
|
||
|
I to had this problem with my 2002 AU3 Falcon Forte. I rang around and found a Locksmith here in Brisbane that did it for me for $120 (cut a key and programmed it). Call Northside Locksmiths on 33502077 (I spoke to Andy) or go to www.northsidelocksmiths.com. Not all locksmiths seemed to be able to do this however so just keep ringing as this is way cheaper than the Ford dealers I contacted for quotes (all around the $200 mark).
|
||
| Top | |
||
| Moran |
|
|||
|
{USERNAME} wrote: I to had this problem with my 2002 AU3 Falcon Forte. I rang around and found a Locksmith here in Brisbane that did it for me for $120 (cut a key and programmed it). Call Northside Locksmiths on 33502077 (I spoke to Andy) or go to www.northsidelocksmiths.com. Not all locksmiths seemed to be able to do this however so just keep ringing as this is way cheaper than the Ford dealers I contacted for quotes (all around the $200 mark).
The only problem is I am in Victoria.
_________________ Factory Specifications are Optional |
|||
| Top | |
|||
| xr8 dismantler |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: I to had this problem with my 2002 AU3 Falcon Forte. I rang around and found a Locksmith here in Brisbane that did it for me for $120 (cut a key and programmed it). Call Northside Locksmiths on 33502077 (I spoke to Andy) or go to www.northsidelocksmiths.com. Not all locksmiths seemed to be able to do this however so just keep ringing as this is way cheaper than the Ford dealers I contacted for quotes (all around the $200 mark). The only problem is I am in Victoria. try ferntree gully locksmiths. |
|||
| Top | |
|||
| muncher2002 |
|
|||
|
hey there i was quoted about 90 for a key and 90 for a smart lock wopper from mr mint the other day i think ??? worth giving them a call there everywere ( included key cut and programing)
_________________ need a rotisserie for a classic resto 0471525912 Tom |
|||
| Top | |
|||
| Reflections |
|
||
|
I had the same problem and spent 3 days researching it. I know with the BA's you can program it yourself, but am unsure about an EF/EL.
EDIT: The process takes roughly 45 seconds as well. Ford are rip off merchants.
_________________ Silver 2003 BA XT - 2 ported 12" Alpine type R subs, 5 by 7 Alpine type R rears, 5 and half inch Alpine splits up front, Alpine head unit.
|
||
| Top | |
||
| Moran |
|
|||
|
Smartlock models dont need programming its only the Smartshield keys as the have a chip in the actual key
_________________ Factory Specifications are Optional |
|||
| Top | |
|||
| PeteL |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: I to had this problem with my 2002 AU3 Falcon Forte. I rang around and found a Locksmith here in Brisbane that did it for me for $120 (cut a key and programmed it). Call Northside Locksmiths on 33502077 (I spoke to Andy) or go to http://www.northsidelocksmiths.com. Not all locksmiths seemed to be able to do this however so just keep ringing as this is way cheaper than the Ford dealers I contacted for quotes (all around the $200 mark). The only problem is I am in Victoria. try ferntree gully locksmiths. Since theres already a thread for this, I wanted to mod an mk6 with only 1 key. Same reason I dont want to go to the local Ford dealer and pay their rip off prices. Ive tried calling Northsidelocksmiths but they're like an hour away from me. I tried to call another {DESCRIPTION}, they are offering me a kit and that I can just buy a new key and they told me I can program it myself. What do you guys think? Since this is my only key, I dont want to lose it and have all the trouble that goes with losing it. Thanks |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 39 guests |
