hi guys
I have an au series 2 factory manual which is not firing on 1,2,5&6 cylinders
I have checked coils,leads & plugs
I have checked wiring from ecm to coil pack & seams to be the ecm
at the moment I am unable to locate a 12ae ecm
so
would an auto ecm with resistor mod get it going if I were to swap ecm, bem & ignition barrel???
thanks for any info

Coil fires in pairs, 1 & 6. 2 & 5, 3 & 4.

Mu guess is your have a failed coil pack.

it has a new coil,leads & crank angle sensor fitted

all sorted
replace ecm & fixed