|
| lark2004 |
|
||
|
Just wondering if anyone here has ever fitted a cabin air filter to a EF/EL Falcon?
I'm in the middle of rebuilding the aircon unit for my car and after cleaning all the crap out of the evaporator I want to stop it from happening again. As far as I can see the opening between the fan and evaporator is about 11cm x 7cm. It also appears to be reasonably accessible from the bottom. I was thinking of cutting the bottom of the case out and making a small frame up attached to a cover plate that will hold a filter in place. Any thoughts? |
||
| Top | |
||
| snap0964 |
|
|||
|
The easiest thing you can do is while repairing the recirc box (the flap arm usually breaks) is glue a square of flyscreen over the intake opening, then redo the foam surround.
I've never had any leaves jam in the blower fan ever again.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| lark2004 |
|
||
|
yeah, fixed the flap arm already
 glued and screwed... it shouldn't break again. And all the foam has been done.If you glue a piece of flyscreen over the opening, how do you clean it? |
||
| Top | |
||
| snap0964 |
|
|||
|
Well obviously you don't. It will let finer particles through, larger particles not. I've had no problems with it blocking up.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| lark2004 |
|
||
|
Fair enough... I still think I'm going to do the replaceable mod for mine. I'll pop some pics in as I do it.
|
||
| Top | |
||
| snap0964 |
|
|||
|
Yeah, see how you go.
I'd say still go with the flyscreen also - very effective in keeping leaves out.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 29 guests |
