|
| Interceptor |
|
||
|
xfnoho wrote: you guys know you can get hinge
pin and bush kits for about $8 in victoria at ford dealers. to stop your doors droping. got a part number for us?
_________________ Banned |
||
| Top | |
||
| niko |
|
||
|
depends how u treat them, usually if u grip the handle with both hands and not just one hand putting central pressure on it and not evenly spread with the use of 2 hands...
_________________
|
||
| Top | |
||
| Jim |
|
||
|
I found the ones at supercheap fairly good, well they've lasted longer then the repco ones and there better to use, they only move a little bit, unlike the others i've used which feel like your breaking it off before your opening it.
Just my opinion. |
||
| Top | |
||
| gilesie |
|
|||
|
I dont seem to have the problem my XE has had a cracked handle for 11 months (ever since it was registered) and being a tradies car I probably open it 10 times a day. and my LTD (FC) has broken 1 in over 2 1/2 years which happens to be the LHF
_________________ XE mockup FE LTD Wagan 5.8
|
|||
| Top | |
|||
| xf tony |
|
||
|
I've had, 2 xa sedans, an xb sedan, 2 xc sedans, a tc cortina sedan, a 71 capri, an xe wagon and im curently on my 4th xf fairmont ghia, the only time i have ever had to replace a door handle was on the xe wagon cause the passenger door was sagging and the gf at the time was as thick as a brick. so as everyone is saying it just comes down to maintenance.
_________________ no one cares about the tough old xf anymore |
||
| Top | |
||
| TRB-041 |
|
|||
|
i put a hinge and bush set out of a XG/XH into mine and put genuine handles in, and havent broken one almost 2.5yrs
_________________ XF EFI Turbo, Intercooled, Wolf 3D, T66, 48mm Pro-Gate, 3inch Mandrel Bent Exhaust, C9 with 3800rpm stall, 3.23:1 with mini spool and 31 spline Billet Moser axles. |
|||
| Top | |
|||
| spoonty |
|
||
|
Im told to use the handles off an f100 upwards,havnt tried it yet,just rplaced passenger front,give it another week and that bastard will go
|
||
| Top | |
||
| Interceptor |
|
||
|
what year/model F100?
_________________ Banned |
||
| Top | |
||
| kenny |
|
|||
|
I found the chrome ones lasted the longest, dunno might be the extra metal or just luck but I went thru 3 black to 1 chrome
_________________
|
|||
| Top | |
|||
| XF_Freak |
|
||
|
Most people fall into the trap of buying aftermarket handles, I have had one of these literally shatter in my hand, where as if you get them direct from Ford Spares, they don't break as easily.
Other things that contribute to the handle breaking besides the door dropping is that the mechanism inside the door (the part all the rods connect to) can become worn and when you pull up the handle on the outside, the lock on the inside get's pulled down slightly, half locking the door, so you have to pull the handle up even higher putting more and more stress on it. Also, You should bend the rods on the inside of the doors so that you don't have to pull the handle up so far to unlatch the door. I have written a full guide on how to replace and prevention methods here; http://www.xfalcon.com/downloads/Doorhandletutorial.pdf |
||
| Top | |
||
| fordowner69 |
|
||
|
I just watched a youtube vid how to fix this the guy areldited a modified screw to the door catch mech and showed that it was so easy to do in just five minutes. i had xf sedans and was forever replacing the door handles years ago and would of liked this before the internet was so popular i pick my xf pano up tonite it has the same problem hard to open the doors will be doing this mod to the doors.
|
||
| Top | |
||
| sooty72 |
|
|||
|
You win the prize for the best thread mine this week! Did you get gov't approval for a mine that big?
 Just replace the hinges, make sure the doors aren't cracked, and adjust the doors correctly. I've had my XH for 13 years now, and once I fixed the cracked doors, and replaced the hinges - all done within the first 3 months - the original handles are still going fine. "Touches wood".. If it breaks tonight, I am totally blaming you.
_________________ Yes, I own a Ute. No, I won't help you move! |
|||
| Top | |
|||
| fordowner69 |
|
||
|
xfnoho wrote: you guys know you can get hinge pin and bush kits for about $8 in victoria at ford dealers. to stop your doors droping. Just as long as you have your doors aligned properly and locks lubed you will not have a problem i have just finished adjusting my doors for a roady and they have never been better just check as when i did this the door hing bolts were loose so it pays to check the hinge bolts just a little advice that i found |
||
| Top | |
||
| Tommyk123123 |
|
|||
|
never had any issues with my XH.
bought my XF with a busted passenger side - snapped the rivet off trying to fix it. in the process of the fix, I bent the lifting Wire in 2 right angles to shorten the distance the handle had to be pulled up in order to move the release pin in the door. once i did this, you can open the door with one finger and moving the handle 1cm - really sensitive and no pressure needed.
_________________ XxX series Falcon |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 7 guests |
