|
| car10001 |
|
||
|
Hi
Wondered if you'd had to choose from a decent low km ef/el engine and a au engine for the ef what would you go with. Will be getting seals done on either engine and getting a xr6 au head either way with cam. How long can a engine sit before going into a car and how do you store one and what would you do to keep the oil going through. Is it worth getting a decent low km ef/el engine and a xr6 au head for it? Any help would be great Thanks |
||
| Top | |
||
| Papa Smurf |
|
||
|
If it were ME, I would go for an AUIII Engine (less klms) and get a head for an XR?
Might even be worth tracking down an AU XR motor? Which ever way you go, it will be a motor with high klms and so, unless you just want to put and old head on it and a used cam? New stuff would be really pointless, especially if you have a motor that has done +150,000 klms. |
||
| Top | |
||
| car10001 |
|
||
|
Is there any other suggestions
|
||
| Top | |
||
| Papa Smurf |
|
||
|
car10001 wrote: Is there any other suggestions Make sure you clean the inlet manifold surfaces and the fuel rail. If you can get a nice set of extractors I would look at a set and a nice 2.5" system 
|
||
| Top | |
||
| barraea |
|
||
|
was there much difference between the EF EL to AU heads XR6 wise non vct's?
Apart from the slight port work |
||
| Top | |
||
| Mad2 |
|
|||
|
barraea wrote: was there much difference between the EF EL to AU heads XR6 wise non vct's? Apart from the slight port work think it was the AU that had the thinner valve stems? not 100% sure |
|||
| Top | |
|||
| barraea |
|
||
|
Mad2 wrote: barraea wrote: was there much difference between the EF EL to AU heads XR6 wise non vct's? Apart from the slight port work think it was the AU that had the thinner valve stems? not 100% sure yes yes you are onto something i have heard the AU XR and plain janes had same valve sizes or something along the lines |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 38 guests |
