|
| Markan |
|
||
Age: 53 Posts: 11 Joined: 30th Sep 2017 Ride: Ford au series 3 xr6 vct Location: Melbourne |
 hi there iv got a question about a scan tool to read my car codesign etc, brought a elm 327 bluthooth one from China and one for Australia both won't work, has anyone found the rite one for a ford au series 3 xr6vct 2002 model much appreciated got a bit of a skip when car in park and the exeleretor goes up and down just a bit early starts. Cheers
|
||
| Top | |
||
| Mad2 |
|
|||
|
Hi. what did you connect the elm's to and via what?
|
|||
| Top | |
|||
| Markan |
|
||
Age: 53 Posts: 11 Joined: 30th Sep 2017 Ride: Ford au series 3 xr6 vct Location: Melbourne |
Concerned to the fuse box next to the sterring wheel via tourqe pro, tryed conecting with no success, cheers
|
||
| Top | |
||
| Mad2 |
|
|||
|
{USERNAME} wrote: Concerned to the fuse box next to the sterring wheel via tourqe pro, tryed conecting with no success, cheers presume you mean to the plug socket in the pic ... top right.  I have connected my AU2 to FORScan via a laptop with some success [also a BF & hopefully shortly a BA as well], but currently still learning. there are a 'few' members on here who have used it on the AU & up models with success, however I do not know anything about "tourqe pro" sorry. also just be aware that NOT all elm's are created equal on ebay. |
|||
| Top | |
|||
| Markan |
|
||
Age: 53 Posts: 11 Joined: 30th Sep 2017 Ride: Ford au series 3 xr6 vct Location: Melbourne |
Thanks for your help hopefully somone can help me and yes ur rite like I said I'n the previous message brought one from chiba won't conect no way so I thought try Australia company atleast this one was trying to conect but no success thinking of getting the elm 327 but wifi give that a go if works I'll put up a thread. Cheers mate
|
||
| Top | |
||
| Mad2 |
|
|||
|
no probs. and it seems to be luck of the draw re elms .... they all appear to come from china tho.
Cheers |
|||
| Top | |
|||
| Markan |
|
||
Age: 53 Posts: 11 Joined: 30th Sep 2017 Ride: Ford au series 3 xr6 vct Location: Melbourne |
Lol, rite there most of the stuff if works lucky lasts a month. Sorry also the air intake snorkel is small was going to put a ba bf big mouth snorkel would you know if it would fit the standard au xr6 air box? ?
|
||
| Top | |
||
| Nigel |
|
||
|
So to Clarify - An AU Does not do OBD2, and so Torque wont give a lot of useful info.
FORSCAN will however give you lots of info. It can see the PCM, Cluster, ABS on the bus and show the fault codes. FORSCAN is free. |
||
| Top | |
||
| Mad2 |
|
|||
|
{USERNAME} wrote: So to Clarify - An AU Does not do OBD2, and so Torque wont give a lot of useful info. sort of 1.5 version.... {USERNAME} wrote: FORSCAN will however give you lots of info. It can see the PCM, Cluster, ABS on the bus and show the fault codes. FORSCAN is free. true |
|||
| Top | |
|||
| Markan |
|
||
Age: 53 Posts: 11 Joined: 30th Sep 2017 Ride: Ford au series 3 xr6 vct Location: Melbourne |
Thanks for that suppose I'll give that a go see if it works
|
||
| Top | |
||
| bondy99 |
|
||
Age: 65 Posts: 1128 Joined: 13th Sep 2010 Ride: Ford Falcon AU 2000 Series II Location: Crestmead |
I've used ForScan for my AUII via ELM3207 connector.
From my understanding the Ford AUII is not fully OBDII compliant, it's only partially compliant. After a certain year i.e. after 2000. That's the impression I got from the Ford Techs, whether its true or not is something else. Yes, it can provide Diagnostic Trouble Codes (DTC) and can reset trouble codes. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 48 guests |
