|
TheInfidelsFalcon78 |
|
||
|
Can someone draw up for me an electrical diagram to follow for the headlights for a 94 Ford Falcon EF, and how to wire in some foglights to fit at the front that operate independently of the headlights? Thanks!
|
||
Top | |
Zombieland |
|
|||
|
when you say fog lights, are you referring to the semi oval lights down the bottom of the bumper? as they are corner lights and are crappy to use as foggies as they shoot the light beam to the side of the car, not towards the front.
But if you are still interested in using them as such, I would suggest buying a driving light wire harness off flea bay for approx $20, with a few mods to it you can have it running off a switch in the cabin |
|||
Top | |
TheInfidelsFalcon78 |
|
||
|
No I mean lights about 15 cms across, at least. I have two of them, they'll have to be fitted to a bar on the front of the car and wired in independently of the headlights so I can turn them on with a switch inside the car. If someone can provide a wiring diagram how to do that, that'd be great. Thanks!
|
||
Top | |
Zombieland |
|
|||
|
{USERNAME} wrote: No I mean lights about 15 cms across, at least. I have two of them, they'll have to be fitted to a bar on the front of the car and wired in independently of the headlights so I can turn them on with a switch inside the car. If someone can provide a wiring diagram how to do that, that'd be great. Thanks! Could be cheaper and easier to get the wire harness from ebay that already has the wires set up and with a relay, then all you have to do is connect the positive and neg to the battery and thread the switch into the cabin via the drivers kickpanel rubber grommet. check out the ebay link to see what I mean https://www.ebay.com.au/itm/LED-HID-Wir ... Sw~ZBZu7bw |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 40 guests |