Can somene tell me which two wires need to be crossed or bridged on the inhibitor switch to ovveride the circuit? I was told the two red wires, cut them and join them together? Second, my car is 94 EF auto, so can someone send me a link please for a bcm and what other models are compatible with mine to use? Thanks everyone!

inhibit switch circuits.

red/dark blue & black/dark green = start circuit wires.

red/black & white/red = reverse light wires.

if you are attempting to over ride a fault in the start circuit of the BCM bridge the two red/blue wires together at the BCM connector -

common fault is for the starter not to work unless you hit the dash near BCM .