|
| bondy99 |
|
||
Age: 65 Posts: 1128 Joined: 13th Sep 2010 Ride: Ford Falcon AU 2000 Series II Location: Crestmead |
Hi,
Does anyone know how one can tighten to spec the pivot bolt on Upper Control Arm when vehicle is on the ground? Seems a bit hard to get at it. Regards, Peter |
||
| Top | |
||
| Shortshift |
|
|||
|
Drive it up on some ramps? Or, measure the height of the lower control arm from the ground, then use a second jack to raise the control arm (after the wheel is removed) to duplicate the upper control arm position.
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| bondy99 |
|
||
Age: 65 Posts: 1128 Joined: 13th Sep 2010 Ride: Ford Falcon AU 2000 Series II Location: Crestmead |
@ Shortshift.
Thanks for that tip. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 37 guests |
