|
| johnnyeHCF |
|
|||
|
Hey guys,does anyone know where I can find these ford tool's.
#SST 303-777 #SST303778 Cheers Johnny.
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||
| Top | |
|||
| Shortshift |
|
|||
|
These tools are probably not for sale any more (although Ford dealereships may still have them in their workshops). Have you tried Bursons? I have a cheaper method.
Use a Bic biro pen and push a metal skewer though the centre of it. Push the tensioner in with the pen casing and turn the skewer anti-clockwise to release the tensioner from its compressed position. Make sure you use a skewer that has 4-6 sides.
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| Mad2 |
|
|||
|
Shortshift wrote: These tools are probably not for sale any more (although Ford dealereships may still have them in their workshops). Have you tried Bursons? I have a cheaper method. Use a Bic biro pen and push a metal skewer though the centre of it. Push the tensioner in with the pen casing and turn the skewer anti-clockwise to release the tensioner from its compressed position. Make sure you use a skewer that has 4-6 sides. that's differant! ....... i'm going by Timmy A's responce/reply from decades age . . . ...... 
|
|||
| Top | |
|||
| johnnyeHCF |
|
|||||
|
Shortshift wrote: These tools are probably not for sale any more (although Ford dealereships may still have them in their workshops). Have you tried Bursons? I have a cheaper method. Use a Bic biro pen and push a metal skewer though the centre of it. Push the tensioner in with the pen casing and turn the skewer anti-clockwise to release the tensioner from its compressed position. Make sure you use a skewer that has 4-6 sides. Hey Shortshift,that sounds like the SOHC chain tensioner your describing-or is DOHC tensioner set up similar? Anyway this is the kit I'm getting which has both the tensioner & cam lock/holding tool and comes with a harmonic balancer puller aswell. This kit is from endeavour tools however you cannot order/buy it directly from them you have to order it from either Repco or Bursons as Shortshift said. Cheers Johnny.
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||||
| Top | |
|||||
| johnnyeHCF |
|
|||||
|
Hey guys, just thought I'd add a pic of the tool (my version anyways) of the SOHC timing chain lock and removal tool's,the tube and Allen key works in the same way as Shortshift said.I made mine from a peice of old aerial cut down and the right size Allen key (I normally use a longer one that's in the tube now) the other tool is for removing the tensioner.
Cheers Johnny.
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||||
| Top | |
|||||
| johnnyeHCF |
|
|||||||
|
Hey guys,just thought I'd give you a look at the timing kit for the DOHC BA-FG I6,and a closer look at the tensioner locking tool.
Cheers Johnny.
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||||||
| Top | |
|||||||
| johnnyeHCF |
|
||||||||
|
Thought I'd put this up-so you can see the tool in action,push down on the lever (on the side of the tensioner) whilst pushing the guide and the tensioner rod in, hold the guide in release the lever till the holes line up place the tool through the lever hole into the tensioner body which will hold the tensioner in that position to remove the cams or whatever your doing.
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
||||||||
| Top | |
||||||||
| Mad2 |
|
|||
|
got me glasses on .... but canna see what ya mean...............
|
|||
| Top | |
|||
| johnnyeHCF |
|
|||
|
Mad2 wrote: got me glasses on .... but canna see what ya mean............... Will get some better pics tomoz Mr Madman
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||
| Top | |
|||
| johnnyeHCF |
|
|||||||
|
Hopefully these pics are a bit clearer.
_________________ XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter |
|||||||
| Top | |
|||||||
| Mad2 |
|
|||
|
Keep up the goood work
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 30 guests |
