|
| 5h4dy |
|
|||
|
Mostly trimmed up now, next is the horrible part - cutting holes
 Attachment: trimmed.jpg [ 259.82 KiB | Viewed 304 times ] |
|||
| Top | |
|||
| 5h4dy |
|
|||
|
Sunglasses console needs some cleaning, but other than that it should be ready to go in the car
Attachment: done.jpg [ 175.14 KiB | Viewed 309 times ] |
|||
| Top | |
|||
| 5h4dy |
|
|||
|
And we're done.
Attachment: Open.jpg [ 196.17 KiB | Viewed 286 times ] Attachment: Closed.jpg [ 153.63 KiB | Viewed 302 times ] |
|||
| Top | |
|||
| Mad2 |
|
|||
|
looking goood!
i found sedans were easy to do 
|
|||
| Top | |
|||
| 5h4dy |
|
|||
|
{USERNAME} wrote: looking goood! i found sedans were easy to do Yeah the gluing is certainly easier on a sedan - the putting in of it though... At least with a wagon you can slide it in through the tailgate |
|||
| Top | |
|||
| Mad2 |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: looking goood! i found sedans were easy to do Yeah the gluing is certainly easier on a sedan - the putting in of it though... At least with a wagon you can slide it in through the tailgate yeah slippin the linnng back in a sedan is 'fun' ........ not, but it's still easier fitting it as the wagooon lining kept bending roughly where the 'B' pillar is whilst getting it in
|
|||
| Top | |
|||
| 5h4dy |
|
|||
|
{USERNAME} wrote: yeah slippin the linnng back in a sedan is 'fun' ........ not, but it's still easier fitting it as the wagooon lining kept bending roughly where the 'B' pillar is whilst getting it in I find it easier getting the new one in than getting the old one out - feels so close to snapping on the way out I assume most of the work would be easier with two people, especially gluing. Trying to pull the fabric over onto the board without one side sticking before I'm ready is a pain - need double-length arms |
|||
| Top | |
|||
| Mad2 |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: yeah slippin the linnng back in a sedan is 'fun' ........ not, but it's still easier fitting it as the wagooon lining kept bending roughly where the 'B' pillar is whilst getting it in I find it easier getting the new one in than getting the old one out - feels so close to snapping on the way out I assume most of the work would be easier with two people, especially gluing. Trying to pull the fabric over onto the board without one side sticking before I'm ready is a pain - need double-length arms yeah the hard part is 'bending it' without wrecking it with her replacement i did it by myself as it was easier than when we did my wagooon lining with two.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 43 guests |
