Fordmods Logo

BA 4 SPEED TO BF ZF CONVERSION 

 

Page 1 of 1 [ 4 posts ] 

 
 Post subject: BA 4 SPEED TO BF ZF CONVERSION
Posted: Fri Mar 26, 2021 3:41 pm 
Fordmods Newbie
Offline

Age: 43

Posts: 2

Joined: 26th Mar 2021

Ride: ba falcon

Location: melbourne
VIC, Australia

Hi all I am upgrading from a donor car going to swap everything over including engine computer and loom from a BF into a BA Ute, to update my engine fresher one and up the 4 speed to a ZF6 .

My question is, is it possible I can do the loom swap without having to completely take the dash out?

I know that I will need a custom tail shaft made up as it might be hard to find one.

Thanks in advance.
Top
 Profile  
 
 
 Post subject: Re: BA 4 SPEED TO BF ZF CONVERSION
Posted: Fri Mar 26, 2021 4:25 pm 
Getting Side Ways
Offline
User avatar

Age: 41

Posts: 402

Joined: 24th Jun 2014

Gallery: 4 images

Ride: BA XR6 Turbo

Location: Jamestown
SA, Australia

aaainoz wrote:
Hi all I am upgrading from a donor car going to swap everything over including engine computer and loom from a BF into a BA Ute, to update my engine fresher one and up the 4 speed to a ZF6 .

My question is, is it possible I can do the loom swap without having to completely take the dash out?

I know that I will need a custom tail shaft made up as it might be hard to find one.

Thanks in advance.



Dash out job BF looms were slightly different to BA.

Having said that i'm running the H looms (floor loom) out of a BF in a BA with Minimal mods, i think the only wire i had to change in it was the Sport shift signal wire as in a BA it took the direction back over and around the drivers side where as the BF one went via passenger side.

100% best bet is to change every loom from the engine bay to the tail lights. Roof looms were the same between both so wont require changing.

 

_________________

Current Ride
BA XR6 Turbo, P3 Paint, BP Trim, Fully Stock Mods to Come!
BA XR6 , P3 Paint, BG Trim, !
1995 EF XR6 The newest member of my ford family!

BLUE BLOOD
Previous Rides
RIP 1996 EF Falcon furura, White sacrificed for parts
1997 EL Falcon
1980 Ford Escort

Top
 Profile  
 
 
 Post subject: Re: BA 4 SPEED TO BF ZF CONVERSION
Posted: Fri Mar 26, 2021 6:01 pm 
Fordmods Newbie
Offline

Age: 43

Posts: 2

Joined: 26th Mar 2021

Ride: ba falcon

Location: melbourne
VIC, Australia

Thanks for the info.

Would you still suggest completely replacing all the way to tail lights given the sedan donor car its all going into a ute?
Top
 Profile  
 
 
 Post subject: Re: BA 4 SPEED TO BF ZF CONVERSION
Posted: Fri Mar 26, 2021 6:57 pm 
Getting Side Ways
Offline
User avatar

Age: 41

Posts: 402

Joined: 24th Jun 2014

Gallery: 4 images

Ride: BA XR6 Turbo

Location: Jamestown
SA, Australia

aaainoz wrote:
Thanks for the info.

Would you still suggest completely replacing all the way to tail lights given the sedan donor car its all going into a ute?


i'd stick with the ute looms i think and re rout the sport shift wire accordingly i think from memory it should only be 1 wire (it was in my instance but i was sedan to sedan) sedan looms will be too short for the ute. check check and compare visually between both.

 

_________________

Current Ride
BA XR6 Turbo, P3 Paint, BP Trim, Fully Stock Mods to Come!
BA XR6 , P3 Paint, BG Trim, !
1995 EF XR6 The newest member of my ford family!

BLUE BLOOD
Previous Rides
RIP 1996 EF Falcon furura, White sacrificed for parts
1997 EL Falcon
1980 Ford Escort

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 4 posts ] 

Who is online

Users browsing this forum: No registered users and 140 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 15, 2024 5:00 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names