|
| lethal EA |
|
|||
|
Found this a while ago. Printed in 2000 but could still be usefull today
Anyone who is interested in different Intake Power figures check this out http://www.andersonfordmotorsport.com/media/intake1.htm
_________________ Black ED Ghia |
|||
| Top | |
|||
| WARMACHINE |
|
||
|
Yep this NEEDS to be a sticky, mods..
|
||
| Top | |
||
| lukey1990 |
|
||
|
Some really useful information there, thanks mate.
It's also handy to have it all in the one place.
_________________
|
||
| Top | |
||
| EBXR8380 |
|
|||
|
Some of those manifolds have been changed alittle since then...
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| Scaffy |
|
|||
|
I was just telling XH5LWEPN last week I'm thinking about a Systemax II for my next intake. This just confirms it'll be the right choice for what I'm after. A good read, thanks.
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| MICKYYYY |
|
||
|
Some nice reading material boys, enjoy
 EBXR8380 is right as some have changed a little.... After all my research it seems to me that edelbrock victor 5.0 EFI and Trick Flow box ported make great power with 302ci and up cubic inches when tied in with correct heads, cam and extractors. http://www.mustang50magazine.com/techar ... index.html http://www.mustang50magazine.com/techar ... index.html http://www.mustang50magazine.com/techar ... index.html http://www.mustang50magazine.com/techar ... index.html http://www.mustang50magazine.com/techar ... index.html http://www.mustang50magazine.com/techar ... index.html http://www.mustang50magazine.com/techar ... index.html http://www.mustang50magazine.com/techar ... index.html http://www.mustang50magazine.com/techar ... index.html http://www.mustang50magazine.com/techar ... index.html
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| XR9UTE |
|
||
|
{USERNAME} wrote: I was just telling XH5LWEPN last week I'm thinking about a Systemax II for my next intake. This just confirms it'll be the right choice for what I'm after. A good read, thanks. Yes it's just unfortunate that you can't run the intake facing the passenger side. Of course the article is a little old and the RPM2 was not tested(the RPM1 is basically crap). It'd be interesting to see how this goes because it really copies many of the features of the Holley/Saleen/Vortech design. You can also buy a 5.0 truck lower and use just the Holley upper. |
||
| Top | |
||
| Scaffy |
|
|||
|
That rules the Holley out for me then. Unless the battery goes in the boot.
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| XR9UTE |
|
||
|
Yes an RPM2 is probably the way to go. Although the boot is a good place for the battery which ever way you go.
|
||
| Top | |
||
| Aussie Pete |
|
|||
Age: 54 Posts: 92 Joined: 8th Apr 2012 Ride: EA Falcon S 30th Anniversary Location: Brisbane |
{USERNAME} wrote: Yes it's just unfortunate that you can't run the intake facing the passenger side. I'm not sure that's true. It's been a few years now since I built a 347 for an AU2 XR8 but back then I went with the Trickflow because you can flip the upper 180 degrees to face the throttle body to the passenger side, therefore perfect for the Australian Falcon. The TF lower to upper mounting flange is mirrored so the upper goes on either way. Another positive for the TF upper is you can machine the Trickflow wording off easily and create a rectangular depression where you can mount a nameplate such as Tickford or similar. On my 347 fitted with TF heads and teh TF Street Heat, the best outcome was using the TF with a phenolic spacer between upper and lower.
_________________ 1991 EA2 Ford Falcon S Sedan |
|||
| Top | |
|||
| XR9UTE |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: Yes it's just unfortunate that you can't run the intake facing the passenger side. I'm not sure that's true. It's been a few years now since I built a 347 for an AU2 XR8 but back then I went with the Trickflow because you can flip the upper 180 degrees to face the throttle body to the passenger side, therefore perfect for the Australian Falcon. The TF lower to upper mounting flange is mirrored so the upper goes on either way. Another positive for the TF upper is you can machine the Trickflow wording off easily and create a rectangular depression where you can mount a nameplate such as Tickford or similar. On my 347 fitted with TF heads and teh TF Street Heat, the best outcome was using the TF with a phenolic spacer between upper and lower. You may not be but, I am. We were talking about the Holley not the TFS. |
||
| Top | |
||
| MAD |
|
|||
|
I wonder how the Tickford 5.6l intake would have fared in this test.
|
|||
| Top | |
|||
| Lowlane7 |
|
||
|
+1 on sticky.
Also maybe getting some images added here of the different ones too. I'd love to see a decent pic of the F150 intake.. Double throttle body's... Mmm.
_________________ [color=#004080]Cheers, Jacob. |
||
| Top | |
||
| hastingsjolene |
|
||
|
|
||
| Top | |
||
| joedavidson |
|
||
|
Years have passed but still a great help to us. Thanks, Bro!
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 12 guests |
