|
| Jack.jones |
|
||
Age: 18 Posts: 2 Joined: 7th Feb 2023 Ride: Ford Falcon xl ba mkII ute Location: Henley Brook |
Does a auII 5 speed manual gearbox have the same bell housing as a ba gearbox and what else would I have to do to make it fit
|
||
| Top | |
||
| Mad2 |
|
|||
|
{USERNAME} wrote: Does a auII 5 speed manual gearbox have the same bell housing as a ba gearbox and what else would I have to do to make it fit only question i have is ........... how will you operate the clutch?. do some research on the clutch pedal for both cars and you will have your answer. Cheers |
|||
| Top | |
|||
| Jack.jones |
|
||
Age: 18 Posts: 2 Joined: 7th Feb 2023 Ride: Ford Falcon xl ba mkII ute Location: Henley Brook |
I was going to run a au cable clutch but I’m not sure if the bell housings are the same or not
|
||
| Top | |
||
| Robert_au |
|
|||
|
{USERNAME} wrote: I was going to run a au cable clutch but I’m not sure if the bell housings are the same or not IIRC the bell housings are the same, personally i wouldn't run the cable clutch and would contact malwood or someone that specialists in gearboxes and do a hydro conversion.
_________________ Current Ride |
|||
| Top | |
|||
| Mad2 |
|
|||
|
{USERNAME} wrote: I was going to run a au cable clutch but I’m not sure if the bell housings are the same or not the bellhousings are the same . . ... but not. the AU version uses a metal clutch arm [cable operated] with a pivot point inside the bellhousing - the BA/BF use a hydraulic slave cylinder to operate the clutch. {USERNAME} wrote: IIRC the bell housings are the same, personally i wouldn't run the cable clutch and would contact malwood or someone that specialists in gearboxes and do a hydro conversion. as mentioned - if you want to go the way you want .... talk to Mal Wood re hydraulic setup for the AU [pedals] mated to the BA/BF slave. |
|||
| Top | |
|||
| rebeccawarner |
|
||
|
Since I wasn't sure whether the bell housings were the same, I wasn't going to use an au cable clutch.
{DESCRIPTION} |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 30 guests |
