|
Xtraman |
|
||
|
Hi All,
I had a quick search but have been unable to find any solutions to my problem and hoping someone might have dealt with this before. My right hand and left hand indicators are no longer working on the exterior. It is flashing up on the dash as bulb failure and the indicators are blinking very fast on the dash, however i have checked all bulbs with a multi-meter and none of them are blown. I have checked the two fuses (1 and 17) under the dash and both are good. Are there any relays i should be checking, or has anyone got any ideas on what to check next? Appreciate any help! |
||
Top | |
Mad2 |
|
|||
|
Xtraman wrote: Hi All, I had a quick search but have been unable to find any solutions to my problem and hoping someone might have dealt with this before. My right hand and left hand indicators are no longer working on the exterior. It is flashing up on the dash as bulb failure and the indicators are blinking very fast on the dash, however i have checked all bulbs with a multi-meter and none of them are blown. I have checked the two fuses (1 and 17) under the dash and both are good. Are there any relays i should be checking, or has anyone got any ideas on what to check next? Appreciate any help! Hi, sorry for the late reply back. from what i understand the flash rate for the indicators is determined by the cluster so there are no longer any relays as per earlier models ie 'E' series/AU. if the globes are fine, have you checked the connections at cluster for full connection? [make sure they are fully seated]. did you also use the multimeter to make sure there was some voltage at the indicators - one lead to body & other to the power cable [no idea which off hand] & that the earth had continuity?. |
|||
Top | |
Ashmardon |
|
||
|
Did you ever figgure out the issue? I am having the same problem. The indicators were working fine until i plugged a trailer in but now are doing exactly as you described.
|
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 4 guests |