|
daleryan198488 |
|
||
|
Hi
I have a 2011 ford falcon BF it has started making a really bad knocking noise The noise is worse when it's cold but still there when it warms up It was making a little bit of a ticking noise Now it's started making a really bad knocking noise I have posted the video here https://youtube.com/shorts/ukvyDUkiZks? ... RrScN0JA73 I am really worried.... I read somewhere jt could be bent rod? I have lubricated the tensioner pulley as ppl had suggested Without my car I lose my job and I am worried it's going to die any minute Any help is really appreciates |
||
Top | |
daleryan198488 |
|
||
|
Update . It almost goes away when the car is hot
|
||
Top | |
Mad2 |
|
|||
|
you have more of a chance here - http://www.fordforums.com.au/showthread.php?p=6888875#post6888875 of getting an answer to your question. with my BA i did have a [what i thought] bearing/knocking/grinding noise .. that turned out to be the gearbox[which was replaced]. this may/may not be your issue. best get it checked out before it craps itself.
|
|||
Top | |
fortunediffer |
|
||
|
A knocking sound from your car's engine isn't always indicative of a serious problem; it could be as simple as low-quality fuel. Most cars have a knock sensor that detects engine knocks and alerts the ECU to correct the issue. Thus, a knocking noise could be caused by a faulty knock sensor. basketball stars
|
||
Top | |
hudsonhawk69 |
|
||
|
daleryan198488 wrote: Hi I have a 2011 ford falcon BF it has started making a really bad knocking noise The noise is worse when it's cold but still there when it warms up It was making a little bit of a ticking noise Now it's started making a really bad knocking noise I have posted the video here https://youtube.com/shorts/ukvyDUkiZks? ... RrScN0JA73 I am really worried.... I read somewhere jt could be bent rod? I have lubricated the tensioner pulley as ppl had suggested Without my car I lose my job and I am worried it's going to die any minute Any help is really appreciates Could be a noisy hydraulic lifter... could be a lot of things... |
||
Top | |
elford |
|
||
|
Sounds like a broken timing chain guide rubbing on the chain , take the rocker cover off and look down the front with a torch ,its not a bearing or a rod the nose is too fast ,it sounds exactly the same as my sons xr6 turbo when the chain guide broke fell down and was rubbing on the chain ,we just did a timing chain kit and all good again ,good luck
|
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 52 guests |