|
4.9 EF Futura |
|
|||
|
Anyone in SA know a definate place to get this stuff? Supercheap and Repco have proved to be fruitless...
Anyone who has seen my car would know the passenger side headlight really lets the team down! lol
_________________ I promise..... I will never die. |
|||
Top | |
blackjack_original |
|
||
Posts: 3516 Joined: 8th Nov 2004 |
[self-deleted]
Last edited by blackjack_original on Fri Jun 06, 2014 3:30 pm, edited 1 time in total. |
||
Top | |
Aurora 98 |
|
|||
|
Believe it has been discontinued mate, might have to try New Zealand or USA for it.
_________________ June 9 - Sept 3 - in boise idaho USA |
|||
Top | |
cds70 |
|
||
|
I purchased some the other day from Auto Pro. Although this shop is nothing like your normal Auto Pro, that's the name they use. I was speaking to the guys behind the counter and they knew exactly what I was talking about, and we chatted for a while about it. It's made in USA if that helps. I bought it in a little town called Goulburn NSW, and if I can buy it here, I'd be very surprised if you can't get it in Adelaide.
|
||
Top | |
Aurora 98 |
|
|||
|
Have never looked for it, I don't go to auto parts stores as all the stuff I use and car servicing stuff I get from elsewhere.
Somebody must have it.
_________________ June 9 - Sept 3 - in boise idaho USA |
|||
Top | |
uglybob |
|
|||
|
wasn't it a WA product? if you find where & if its sold over here at all mart, i can send one off to ya
_________________ R.I.P. Scotty |
|||
Top | |
Ugly Igley |
|
|||
|
{USERNAME} wrote: wasn't it a WA product? if you find where & if its sold over here at all mart, i can send one off to ya
It is a US product. And as much as you would like to fras, you cant send an aerosol through the post.... Check out http://www.mulford.com.au/content/locations.htm. This is Mulford Plastics. They are one of the only distributors in Australia. If they dont have it then alas it has probably been discontinued. I dont think it has though because the online US plexus order site is still operational...
_________________ Proud owner of one of very few BF SR manual (June 06 build)
|
|||
Top | |
blackjack_original |
|
||
Posts: 3516 Joined: 8th Nov 2004 |
[self-deleted]
Last edited by blackjack_original on Fri Jun 06, 2014 3:30 pm, edited 1 time in total. |
||
Top | |
Funtime25 |
|
||
|
have u tried menzals on south road?
Als try "Limo scene at Lonsdale" Alan uses it fro the limo conversions. Another plastics place used to be ib Grote street next to BEA motors but they have moved I believe they r now down Thebarton way, think they r called "called Adelaide plastics" and try Acrilix Plastics Pty Ltd |
||
Top | |
4.9 EF Futura |
|
|||
|
{USERNAME} wrote: have u tried menzals on south road?
Als try "Limo scene at Lonsdale" Alan uses it fro the limo conversions. Another plastics place used to be ib Grote street next to BEA motors but they have moved I believe they r now down Thebarton way, think they r called "called Adelaide plastics" and try Acrilix Plastics Pty Ltd Beauty, thanks for the suggestions guys. Aurora - have you had much experience freshening up the EF/EL headlights? I managed to get the yellow tinge out with wet/dry but need something to bring a smooth finish back (and hopefully offer some protection). I'm very hesitant to just go and 'try' anything and everything on there... formally working in lens production I know that polycarbonates dont get along well with a LOT of substances.
_________________ I promise..... I will never die. |
|||
Top | |
XR~ADZ |
|
|||
|
Go with Menzels plastic on south road - at regency park.
I purchased soem from them a while back. it diddnt really work very well for me but....
_________________ "This is FORD country.... Where on a quiet day you can hear the HOLDENS rusting...." |
|||
Top | |
Ugly Igley |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: have u tried menzals on south road? Als try "Limo scene at Lonsdale" Alan uses it fro the limo conversions. Another plastics place used to be ib Grote street next to BEA motors but they have moved I believe they r now down Thebarton way, think they r called "called Adelaide plastics" and try Acrilix Plastics Pty Ltd Beauty, thanks for the suggestions guys. Aurora - have you had much experience freshening up the EF/EL headlights? I managed to get the yellow tinge out with wet/dry but need something to bring a smooth finish back (and hopefully offer some protection). I'm very hesitant to just go and 'try' anything and everything on there... formally working in lens production I know that polycarbonates dont get along well with a LOT of substances. If Plexus can't be found ( although I strongly recommend it as it is so damn good) liquid car wax can be substituted. I have used kitten liquid wax on mine without issues. Essentially after stripping the yellow off with sandpaper you want to seal the imperfections across the lens, enabling a protective seal and smoother finish. This will also prolong this happening again as the is less direct contact with cooling elements: rain. Liquid polish/wax does this for paint, and if applied in small amounts can also be effective on the lens. But again try this at your own risk. i suggest if you are unsure with using the liquid polish/wax try a small amount first.
_________________ Proud owner of one of very few BF SR manual (June 06 build)
|
|||
Top | |
Ugly Igley |
|
|||
|
{USERNAME} wrote: What the hell is plexus... Is that the plastick stuff like glass only not? If it is you can get sheets from bunnings... not cheap though...
I think you are thinking of plexi-glass, the plastic alternative to glass.
_________________ Proud owner of one of very few BF SR manual (June 06 build)
|
|||
Top | |
ItchiOne |
|
||
|
Bursons in melbourne has it.
Don't know if they have outlets in the city of churches Cheers |
||
Top | |
blackjack_original |
|
||
Posts: 3516 Joined: 8th Nov 2004 |
[self-deleted]
|
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 47 guests |