|
| EL XR8 |
|
|||
|
I was planning in Running 36lb injectors as i have a set atm.
If i need a MAF with the ECU i get, i was going to get a 70mm Ford MAF, off an AU Series 2 XR. Does that sounds feasbile at all? Cheers Dave |
|||
| Top | |
|||
| EDXR8 |
|
|||
|
36lb injectors with a 70mm MAF will not run well without tuning and I would be towing it down there. If you run the 70mm MAF it will be a restriction with the blower. If you keep the stock computer and need a MAF I would look at a 73/80mm C&L or Ford 90mm LMAF.
|
|||
| Top | |
|||
| CHEF |
|
|||
|
would it even start? My 55lbs didnt with the eec
|
|||
| Top | |
|||
| EDXR8 |
|
|||
|
36ers will probably start but they will be damn rich. My 42's won't start without the accelerator flat to the floor to shut of the injectors.
|
|||
| Top | |
|||
| EL XR8 |
|
|||
|
Ahh ok,
Well i had wondered about the MAF, if i use certain aftermarket ECU's they don't require one. So thats kinda why i haven't got a MAF yet, as i still don't know what ECU i will be running. Anyone have a C&L or Lightning MAF, even a Pro-M that they want to sell! 
Cheers, Dave |
|||
| Top | |
|||
| EDXR8 |
|
|||
|
I may have a source on a 73mm C&L but I believe it comes with a 24lb tube (you can get the tubes from CAPA to suit 19, 24, 30 & 38lb injectors for $67). I think he wants around $300 for it and its brand new, but I would have to check if you are interested.
|
|||
| Top | |
|||
| EL XR8 |
|
|||
|
Thanks mate,
I'll get back you soon about that, once i sort out the ECU problem. Cheers, Dave |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 38 guests |
