Fordmods Logo

wolf ecu 

 

Page 1 of 1 [ 15 posts ] 

 
 Post subject: wolf ecu
Posted: Tue Jul 05, 2005 9:57 pm 
Parts Gopher
Offline

Posts: 58

Joined: 3rd Jul 2005

Location: melbourne
VIC, Australia

hey i just bought a seond hand wolf 3d ecu version 3 from a friend to put in my xf,im only using the igniton side and aux outputs only.after i fit it to the vehicle wots the next step?
Top
 Profile  
 
 
Posted: Tue Jul 05, 2005 11:04 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 2282

Joined: 14th Jan 2005

Gallery: 8 images

Ride: ED Fairmont Ghia & EF XR8

Location: Melbourne
VIC, Australia

getting it tuned

 

_________________

Image

Top
 Profile  
 
 
Posted: Wed Jul 06, 2005 12:14 am 
Getting Side Ways
Offline
User avatar

Posts: 1960

Joined: 6th Nov 2004

Gallery: 22 images

Power: 315 rwkw

Location: Under the flight path of incoming packpackers
NSW, Australia

Did you get the Wolf owners manual with it? Its not too hard to get a rough tune happening... then off to a tuner/dyno
Top
 Profile  
 
 
Posted: Wed Jul 06, 2005 9:50 am 
Parts Gopher
Offline

Posts: 58

Joined: 3rd Jul 2005

Location: melbourne
VIC, Australia

i was told it comes with everything book/hand controller/wiring/etc.do i use a laptop to tune the car or the hand controller?
Top
 Profile  
 
 
Posted: Wed Jul 06, 2005 4:26 pm 
Getting Side Ways
Offline
User avatar

Posts: 1960

Joined: 6th Nov 2004

Gallery: 22 images

Power: 315 rwkw

Location: Under the flight path of incoming packpackers
NSW, Australia

You can use either, I use the hand controller
Top
 Profile  
 
 
Posted: Wed Jul 06, 2005 10:34 pm 
Parts Gopher
Offline

Posts: 58

Joined: 3rd Jul 2005

Location: melbourne
VIC, Australia

how is your dizzy setup?and wot coil r u using?
Top
 Profile  
 
 
Posted: Wed Jul 06, 2005 11:23 pm 
Getting Side Ways
Offline
User avatar

Posts: 1960

Joined: 6th Nov 2004

Gallery: 22 images

Power: 315 rwkw

Location: Under the flight path of incoming packpackers
NSW, Australia

I havnt got round to setting it up for ignition, so standard coil and retarded dizzy. Once Im happy with the fuel ARs I'll set up the ignition through the wolf.
You need to take a timing send from the ignition module and lock the dizzy. The wolf will send ignition through the dizzy. The manual explains it better though
Top
 Profile  
 
 
Posted: Wed Jul 06, 2005 11:29 pm 
Parts Gopher
Offline

Posts: 58

Joined: 3rd Jul 2005

Location: melbourne
VIC, Australia

so when it comes to adjusting the timing it is done thru the hand controller?
Top
 Profile  
 
 
Posted: Wed Jul 06, 2005 11:39 pm 
Getting Side Ways
Offline
User avatar

Posts: 1960

Joined: 6th Nov 2004

Gallery: 22 images

Power: 315 rwkw

Location: Under the flight path of incoming packpackers
NSW, Australia

yep. At each 500 rpm and 8 load points. All the new ecus have much higher resolution... steps of 125 rpm, but the version3 still works very well
Top
 Profile  
 
 
Posted: Wed Jul 06, 2005 11:46 pm 
Parts Gopher
Offline

Posts: 58

Joined: 3rd Jul 2005

Location: melbourne
VIC, Australia

wot about a/f ratio's & boost control,can that be set also with the hand control?
Top
 Profile  
 
 
Posted: Wed Jul 06, 2005 11:52 pm 
Getting Side Ways
Offline
User avatar

Posts: 1960

Joined: 6th Nov 2004

Gallery: 22 images

Power: 315 rwkw

Location: Under the flight path of incoming packpackers
NSW, Australia

no boost control, only V4 has that in the Wolfs.
Yep, ARs are done by setting the injector pulse widths at the same load and rpm points.
Your only using it for igntion right?
Top
 Profile  
 
 
Posted: Thu Jul 07, 2005 12:15 am 
Parts Gopher
Offline

Posts: 58

Joined: 3rd Jul 2005

Location: melbourne
VIC, Australia

so if you say v4 has boost control thats wot this one is.he said to me it has boost control,hand controller,books.software,wiring,etc.
Top
 Profile  
 
 
Posted: Thu Jul 07, 2005 12:19 am 
Getting Side Ways
Offline
User avatar

Posts: 1960

Joined: 6th Nov 2004

Gallery: 22 images

Power: 315 rwkw

Location: Under the flight path of incoming packpackers
NSW, Australia

oh, maybe it does... mine doesnt but it could be newer than my v3, they change stuff around a bit
Top
 Profile  
 
 
Posted: Fri Jul 08, 2005 12:55 am 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 516

Joined: 20th Dec 2004

Gallery: 4 images

Ride: EL Manual

Location: S.E. Melbourne
VIC, Australia

xf4ltrturbo wrote:
so if you say v4 has boost control thats wot this one is.he said to me it has boost control,hand controller,books.software,wiring,etc.


Time to read the manual! :D

 

_________________

Manual EL Gli.
Mods: Crow Stg3, Chiptorque Dynotune. Lukey Exhaust. DBA slotted rotors, EBC Pads. Whiteline Low Susp. EL GT Swaybars, ROH Envy 17 x235 wheels. Vehicle Datalogger Display V2.0,

Top
 Profile  
 
 
Posted: Fri Jul 08, 2005 7:32 am 
Getting Side Ways
Offline
User avatar

Posts: 1960

Joined: 6th Nov 2004

Gallery: 22 images

Power: 315 rwkw

Location: Under the flight path of incoming packpackers
NSW, Australia

yeah read it over and over and over... mines permanently in the car
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 15 posts ] 

Who is online

Users browsing this forum: No registered users and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 22, 2024 2:01 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names