|
| data_mine |
|
|||
|
I 'sand' mine flat on top and lightly on the sides, gives a very nice even distribution of light.
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
| Top | |
|||
| twirqurky |
|
||||
|
Ok 2hrs later its done.
Two bits of advice: THe rubber vertical stands around the filter are very suspectible to breaking off so be very careful. 2) The LCD screen has to go in a certain way. I completed it once but found out it was upside down. I feel like Chunkz DOH! Anyway this is how it came oiut at midday.
|
||||
| Top | |
||||
| data_mine |
|
|||
|
ok now check the first two pics here:
http://fordmods.datamine.tk/gallery.asp?gallery=dials and sand your LED, you'll get rid of that 'hotspot' and have a very evenly lit display.
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
| Top | |
|||
| ch0c0 |
|
||
|
mmm chris
that sanding led trick works a charm. definitely directs the light better 
only drawback is it tends to make the light a lil more dull, but i guess we can live that that
_________________ BOOSTED Last edited by ch0c0 on Sun Jul 10, 2005 6:37 pm, edited 1 time in total. |
||
| Top | |
||
| chunkz |
|
|||
|
less dull as in brighter?
isnt that better? this sanding thing, do you just sand the top, the sides, all over???
_________________
|
|||
| Top | |
|||
| ch0c0 |
|
||
|
sorry my bad, more dull
originaly post edited to suit.
_________________ BOOSTED |
||
| Top | |
||
| data_mine |
|
|||
|
Sand the top flat, and rough up the sides.
ch0c0, the difference you may be talking about is due to the fact that normally the LED's light output is focus in a narrow-ish beam of about 15°. After sanding flat, and sides, the same light output is now ~180° - same light more spread. If the now apparently dimmer light is a worry, reduce the resistor used a bit to run the LED harder. BTW:  
Two identical LEDs, the one on the left is sanded, both run @ 10mA.
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
| Top | |
|||
| chunkz |
|
|||
|
ahhh is that what that picture was
 i didnt really know the point of it, when ou gave the link
thinking maybe focus the camera
but cheers, seems like a good idea
_________________
|
|||
| Top | |
|||
| twirqurky |
|
||
|
Yeah I sanded the top down a little but was worried I might break it so I oinly gave it avery light sanding. I can live with the hotspot for now.
|
||
| Top | |
||
| data_mine |
|
|||
|
you can go a long way down, the LED 'chip' is only about a 1/4 the way in.
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
| Top | |
|||
| cds70 |
|
||
|
It may well have been asked before, but what is the difference from making the LED's up (LED+resist+holder) and the Narva ones (complete units).
Which is better and why? |
||
| Top | |
||
| data_mine |
|
|||
|
narva ones are complete, ready to use (if you like DIM). I changed the resistors in mine to a lower value to brighten them up. It's an easy desolder the old, solder in the new job.
Don't think I've got any pics of that process, but it's piss easy.
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 22 guests |
