|
| cds70 |
|
||
|
Does anyone know what the thickness is of a new front rotor for a EF/EL??? Standard rotor, not slotted/cross drilled.
|
||
| Top | |
||
| NC 5ltr |
|
|||
|
i think its 28 but dont quote me on it
_________________ "Looking at cleavage is like looking at the sun. You don't stare at it. It's too risky. You get a sense of it and then you look away."
|
|||
| Top | |
|||
| Interceptor |
|
||
|
25mm regardless of wether it's standard, slotted, crossdrilled, or crossdrilled and slotted
_________________ Banned |
||
| Top | |
||
| cds70 |
|
||
|
{USERNAME} wrote: 25mm regardless of wether it's standard, slotted, crossdrilled, or crossdrilled and slotted
Thanks Interceptor. Am I correct is saying that the min. size allowed after being machined is 22.2mm??? Also, what would I expect to pay for standard rotors and slottered? It looks like I will need to replace mine, and I'm considering my options...standard/slotted! |
||
| Top | |
||
| Interceptor |
|
||
|
hightekbrakes@iprimus.com.au
E-mail cam at hightek brakes and ask him.... IMO his prices are damn good
_________________ Banned |
||
| Top | |
||
| cds70 |
|
||
|
{USERNAME} wrote: hightekbrakes@iprimus.com.au
E-mail cam at hightek brakes and ask him.... IMO his prices are damn good Yeah, just done that as you posted. Just thought you may have an idea. Thanks mate. |
||
| Top | |
||
| Interceptor |
|
||
|
no clue what E-series discs are worth, but last time i got a quote, DBA slotted XF front and rear discs were $95.50 each
_________________ Banned |
||
| Top | |
||
| snap0964 |
|
|||
|
{USERNAME} wrote: Am I correct is saying that the min. size allowed after being machined is 22.2mm??? Yeah, 22mm - this info is usually cast into the rotors (front and rear).
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| cds70 |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: Am I correct is saying that the min. size allowed after being machined is 22.2mm??? Yeah, 22mm - this info is usually cast into the rotors (front and rear).They don't allow you much, particularly after you've had them machined. On average how much would they machine off. I understand to get an exact figure would be impossible? How many times do rotor get machined on average before they are throw-aways? |
||
| Top | |
||
| snap0964 |
|
|||
|
{USERNAME} wrote: They don't allow you much, particularly after you've had them machined. On average how much would they machine off. I understand to get an exact figure would be impossible? How many times do rotor get machined on average before they are throw-aways? I wouldn't know, you'd have to speak to a brake centre on this issue. What I have been told is that slight warping is quite common - expect to machine your front discs probably around every 50K - 60K kms. This will obviously vary with driving habit, type of pads, etc.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Mr Man |
|
|||
|
DBA slotted front rotors are $115 each from bursons, and about $75 (i think, dont quote me on this) for just standard ones....
_________________ 300+rwkw HeadsexTuned XR6 Turbo Ute *NOW SOLD |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 42 guests |
*