|
cwalc |
|
||
|
Hi Guys,
I'm new just wanted to know if anyone could help. I have a ef xr6 and want to install climate control from a fairmont. I have been told that the wiring loom for all ef series cars are the same so should be able to support such a change is this true. Am i wasting my time. Any advice is greatly appreciated. Cheers. |
||
Top | |
Happy |
|
|||
|
no it isn't - fairmont has the high series loom, your xr has the mid series (same as futura) if you want the cc mupgrade you'll need to upgrade to the high series loom or tap into your existing loom for the extra wires.
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
Top | |
snap0964 |
|
|||
|
http://www.fordmods.com/forums/documents.php?doc=8 makes for good reading as well . . . .
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
Top | |
Happy |
|
|||
|
Quote: Fordmods Lite | Portal (Home) | Forums | Search
Photo Gallery | Events Calendar | Technical Documents No new messages | New Posts | Watched Topics | Logout [ Happy ] "One of these buttons isn't like the others children, it is a search button" "People hate the search button, they'd rather post a question than use the almighty power of the search button!" "Can you find the search button?"
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
Top | |
Mitch_ |
|
|||
Posts: 6168 Joined: 5th Nov 2004 |
{USERNAME} wrote: | Logout [ Happy ]
Hey i dont have that button!
_________________ |
|||
Top | |
fuzion |
|
||
|
ahh jes, ive just done it!
Changing the dash loom is a 5 min job after your dash is out.. to change the airbox, f**k me its a pain in the a** still puttin all the car back together, have a look in my other posts, posted up pix |
||
Top | |
DMac |
|
||
Age: 38 Posts: 1372 Joined: 7th Nov 2004 Ride: Lancer Coupe Location: Southeastern suburbs, Melbourne |
{USERNAME} wrote: Quote: Fordmods Lite | Portal (Home) | Forums | Search Photo Gallery | Events Calendar | Technical Documents No new messages | New Posts | Watched Topics | Logout [ Happy ] "One of these buttons isn't like the others children, it is a search button" "People hate the search button, they'd rather post a question than use the almighty power of the search button!" "Can you find the search button?" Who cares mate. Seriously you dont have to answer if its something you have seen before. I know your time must be so precious that you cant take 30sec to read the first post and realise its been done before. But not waste another 2 mins quoting s**t. We dont need police in the forums thanks. |
||
Top | |
twirqurky |
|
||
|
I actually think Greg is ight. Whats hte point iof having a search tool if no one uses it.
Anyway to add in climate control on your XR I think you need to upgrade the computer chip as well. I may be wrong however |
||
Top | |
the_scotsman |
|
|||
|
No "computer chip" updates required as far as I am aware, althoughn all the other s**t IS required like sun load sensor, ambient temp sensor etc....I was thinking about it, but its too much friggin around...
|
|||
Top | |
cwalc |
|
||
|
thanks for your help guys.
|
||
Top | |
cwalc |
|
||
|
thanks for your help guys.
|
||
Top | |
twirqurky |
|
||
|
{USERNAME} wrote: I was thinking about it, but its too much friggin around...
My thoughts exactly. Wait til it gets easier and more people have done it. |
||
Top | |
philaddis |
|
|||
|
Have a look here. This mod was performed on an EB but the airbox and dash mounting is pretty much all the same. The differences are negligible.
http://www.fordmods.com/forums/viewtopi ... highlight= It is not a hard thing to do, but as it says, I would only perform this mod if you have a complete high series dash (not fairlane tho as you will run into problems with the cluster) and airbox to slot in thier. EB and EF/L air boxes are the same and unless you have the climate control one you will find the conversino impossible. I got mine from walliston wreckers in Perth for $100.00 and that included the body loom (for cruise) and centre console and a few other bits that I needed. When I did mine I spent the whole time worrying that it wouldn't work when I got it back together, but it worked first go and was essentially plug and play. The whole conversion took about 15 hours, but would be faster if you are a better spanner twirler than I. Good luck if you decide to go through with it. It is well worth it as the end result as a big improvement and really enjoyable (especially if you do it yourself). EDIT: Oh yeah if you do it. Take the time to change your heater core at the same time (adds 15 minutes and about $75 but will save you big quids or bother if you keep the car for a long time).
_________________ ED XR8 Spri-mitatio-nt |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 27 guests |