|
pinkbits8u |
|
|||
|
im building a engine and dont know what cam to put in it
396 cleveland 8.6 to 1 premium ill bve driving it around ( only on weekends ) for about 2 months before i put the 6/71 blower on what do you think it will drive like with a" blower " cam in it without boost |
|||
Top | |
Bert |
|
||
|
I would recomend a hydraulic cam with at least 230deg@050" on the inlet and another 8-10 degrees on the exhaust. Grind it on a 112LSA and install it straight up.
Due to the size of the motor low speed torque will not be an issue. I would also recomend a really good port job on the exhaust side with larger valves. Using this type of setup would waste a little fuel due to overscavanging and be a little lazy when NA due to the wide LSA. |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 41 guests |