|
| Blu Falc |
|
|||
|
I made a shift kit to suit an ef when i really need on to suit an EA. My understanding was that the shift kit would be the same but the pins would be different. i used an 18ohm resistor and a 5.6ohm resistor in mine when i really needed a 20ohm and 1ohm resistor. If anyone wants my shift kit pm me with an offer (anything really) and i will install it for you as well. its in a jiffy box ready to be installed. You cant have the switch though. I am not goin to post it either unless the offer is substantial.
|
|||
| Top | |
|||
| Mash85 |
|
||
|
im stupid. wtf is a shift kit?
_________________
|
||
| Top | |
||
| Blu Falc |
|
|||
|
Connects into the auto trans electronics and when switched on gives a much harder shift.
|
|||
| Top | |
|||
| snap0964 |
|
|||
|
{USERNAME} wrote: I made a shift kit to suit an ef when i really need on to suit an EA. My understanding was that the shift kit would be the same but the pins would be different. i used an 18ohm resistor and a 5.6ohm resistor in mine when i really needed a 20ohm and 1ohm resistor. If anyone wants my shift kit pm me with an offer (anything really) and i will install it for you as well. its in a jiffy box ready to be installed. You cant have the switch though. I am not goin to post it either unless the offer is substantial. So why don't you replace/install/remove resistors to give you the required values 
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Blu Falc |
|
|||
|
All that it is, is two resistors and a project box wired up in the correct way. I read on here quite often that there are people who are not at all comfortable soldering so i have this for them, the kits you buy for exactly the same thing sell for almost $100 or go on ebay when you can find them for $50. Im open to any offers.
To open it up and rep[lace the resistors is pointless because i have a spare project box and it would be easier to just make a new one. |
|||
| Top | |
|||
| Blu Falc |
|
|||
|
All that it is, is two resistors and a project box wired up in the correct way. I read on here quite often that there are people who are not at all comfortable soldering so i have this for them, the kits you buy for exactly the same thing sell for almost $100 or go on ebay when you can find them for $50. Im open to any offers.
To open it up and replace the resistors is pointless because i have a spare project box and it would be easier to just make a new one. |
|||
| Top | |
|||
| cominthru |
|
|||
|
hey, so this kit would be no good for an EB then?
cauz i was gonna go down to jaycar and get the stuff to make my own but i cant be a*** as per usual! haha
_________________ EB2 Turbo & BF Wagon |
|||
| Top | |
|||
| Blu Falc |
|
|||
|
nah EB you need a 20 ohm and 1 ohm like the EA
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 16 guests |
