|
NABAXT |
|
||
|
hey guys,
i recently 'came across' some FPV pedals for my ba, and i have absolutely no idea how to take the accelerator pedal off, the others slip on and off like a tight glove, but i just dont know how the accellerator one comes off, any one have any ideas, just thought i'd post it up here, sum1 might know..... |
||
Top | |
GlennBA |
|
|||
|
don't you have to drill a hole into the existing pedal and screw them on?
|
|||
Top | |
cobbar_1 |
|
||
|
best way is to pull the accellerator pedal out bit of mucking around but easier than trying to locate the little notch in car. once the pedal box is out get a small screwdriver in behind where u see like a little lip lift up and yank really hard and your pedal will c*m off take the new pad and slide it on and bolt everything back up. or if you can do that in situ even better less heartache......
|
||
Top | |
NABAXT |
|
||
|
thats one thing i didnt wanna have to do, take the pedal box out...but im guessing thats how i gotta do it, if its too much effort i prob wont even bother, i mean its only pedals...which look awesome!! lol
and glen i think its actually the break pedal that u screw over the top, but the accelerator is different, dont know why, think it might be sumfing to do wif the angle that it tilts on wen u putur foot down on it... |
||
Top | |
GlennBA |
|
|||
|
{USERNAME} wrote: thats one thing i didnt wanna have to do, take the pedal box out...but im guessing thats how i gotta do it, if its too much effort i prob wont even bother, i mean its only pedals...which look awesome!! lol
and glen i think its actually the break pedal that u screw over the top, but the accelerator is different, dont know why, think it might be sumfing to do wif the angle that it tilts on wen u putur foot down on it... i'll ask one of my mates, he put some in his ba xr6. |
|||
Top | |
NABAXT |
|
||
|
sweet mate, thanks for ur help.
|
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 36 guests |