|
efweapon |
|
|||
|
Code Diagnostic Monitor
21 Not Mounted to Vehicle Properly I went the diagnostic page and found the fault but how do i go about fixing this fault? |
|||
Top | |
Dellboy999 |
|
|||
|
You sure thats really a code, or not just left in memory and never cleared, I suggest clear the memory and then test it again, it may then be gone.
_________________ Full working BA Shifter now upgraded to BF Shifter. |
|||
Top | |
Timmeh |
|
||
|
These are the pins you need to connect using a wire for more than 10 seconds to clear the codes. You should hear 5 audible beeps to let you know it has worked. |
||
Top | |
efweapon |
|
|||
|
thanks hope it works.
Well my air bag light flashes twice then 5 sec. break then it flashes once. Thats y it would be code 21 and thats what it stats in the diagnostic page. I will try the memory clear and see what happens. I HATE THESE AIR BAGS thanks for a clear diagram also |
|||
Top | |
efweapon |
|
|||
|
thanks hope it works.
Well my air bag light flashes twice then 5 sec. break then it flashes once. Thats y it would be code 21 and thats what it stats in the diagnostic page. I will try the memory clear and see what happens. I HATE THESE AIR BAGS thanks for a clear diagram also |
|||
Top | |
Ryan0001 |
|
|||
|
2 flashes - break - 1 flash means low batery doesnt it??
|
|||
Top | |
XCH45R |
|
|||
|
what do you use to connect the two pins? just a peice of wiire?
|
|||
Top | |
Timmeh |
|
||
|
Yeah just a piece of wire. I pulled a fan out of my computer and butchered the wires from it. Worked well.
It has connections at both ends that sat on the pins nicely. |
||
Top | |
XCH45R |
|
|||
|
*starts taking computer case off...*
lol thats golden! hahahaha |
|||
Top | |
Happy |
|
|||
|
do you connect those pins up with keys in ignition or out or what?
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
Top | |
XCH45R |
|
|||
|
i'm guessing you'd have to have them on acc?
|
|||
Top | |
Timmeh |
|
||
|
Turn the keys to ON where the dash lights come on but do not start the car.
|
||
Top | |
efweapon |
|
|||
|
hi i tried the thing you said with the wires and didn't even get a beep, not one? Is there anything i did wrong.
I connected the wires turn on the acc and nothing. |
|||
Top | |
Timmeh |
|
||
|
Turn the keys to the ON position. ACC is the accessory position not Air Con. ON is the next indent after ACC position but before the ignition/start position.
You must have the wires connected for about 10 seconds or so while the keys are in the ON position. You will clearly hear 5 beeps if you are successful. |
||
Top | |
mattie |
|
||
|
did you take the wire from a fan in your pc? if not then maybe you should
_________________ au3xr8 snorkel
|
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 13 guests |