|
| Krytox |
|
|||
|
g'day all,
Just curious on the best LPG setup for an EF I6 Manual? Tickford type? Impco? other? I'd like to retain the stock inlet and run pipe simular to the AU types... please tell me the best type for performance and or reliablity eg No backfiring etc! cheers
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| ^JAsE^ |
|
|||
|
yo dude u wont get a tickford one aftermarket but the closest one to factory which is supplied to ford by boral is the viale system otherwise impco are the leading aftermarket lpg systems
_________________ boobies are good |
|||
| Top | |
|||
| Slick |
|
|||
|
Krytox wrote: g'day all, go with the tickford type. reason is, I haven't encountered any backfire yet {factory fitter by Tickford} not only they're reliable they're real torquey I think more then petrol anyway.
Just curious on the best LPG setup for an EF I6 Manual? Tickford type? Impco? other? I'd like to retain the stock inlet and run pipe simular to the AU types... please tell me the best type for performance and or reliablity eg No backfiring etc! cheers contact: Gas Injection Technologies for a direct injection setup: www.gas-injection.com.au or GasResearch Performance on: www.gasresearchpc.com.au
_________________ Mind f**k!!! it works on feeble minded ignorant sheeples... there's plenty of em on this site... some are very intelligent but by god they are so thick!!! Pakrat wrote: You can buy them seppertly
|
|||
| Top | |
|||
| twr7cx |
|
|||
|
I'd go GRA, purely becvause there they really seem to encourage people modifying tehre LPG running vehicles and have docos on LPG turbo and s**t.
|
|||
| Top | |
|||
| twirqurky |
|
||
|
Mine ggets converted over next Thursday.
|
||
| Top | |
||
| fairmont |
|
||
|
i have to fix the bloody things when they blow of bungs, blow PCV's through when they backfire, continuse miss fires all alot of fun and head aches
|
||
| Top | |
||
| twr7cx |
|
|||
|
fairmont wrote: i have to fix the bloody things when they blow of bungs, blow PCV's through when they backfire, continuse miss fires all alot of fun and head aches
What are bungs? Should use the metal bottom PCVs not the plastic |
|||
| Top | |
|||
| fairmont |
|
||
|
well on efs the PCV pipe goes to the bottom of the plenem chamber when they put gas on them the move that pipe up to the t/ps the blank the hole of the plenem chamber with something like a rubber foot off a stool.........dont know if you know what im on about but yeah!... its not that bigger prob mate nothing to worrie about but if you idle speed sits up around 2,000 3,000 rpm on pety and runs like crap on gas then look at this
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 75 guests |
