|
| efbignik |
|
|||
|
Hi all
what i want to do is, Do up my xf 250 crossflow i went in a burn out comp and finshed 3rd but it was still lacking power i want 2 know what i can do to a carby motor? it doesn't if it lumpy a s**t it's doesnt have 2 b street legal it's for burnouts and drags thats it's only use. i was thinkin a crow cam part no. 14770 i have put a holley 350 2brl carby on it, i dont want 2 put a snail on it of any thing like that, what kind of roller rockers and lifters do i need for this and what bearings do i need for the bottem end, does any 1 know where i can get a surge tank round 1.5 lt tank under $200 thats just f**k.en nuts help me do the XF 250 PROUD 
_________________ EFBIGNIK 145.9 RWKW Falcon / 16.27 @ 86.72mph (Stock)
|
|||
| Top | |
|||
| efbignik |
|
|||
|
efbignik wrote: Hi all
what i want to do is, Do up my xf 250 crossflow i went in a burn out comp and finshed 3rd but it was still lacking power i want 2 know what i can do to a carby motor? it doesn't if it lumpy a s**t it's doesnt have 2 b street legal it's for burnouts and drags thats it's only use. i was thinkin a crow cam part no. 14770 i have put a holley 350 2brl carby on it, i dont want 2 put a snail on it of any thing like that, what kind of roller rockers and lifters do i need for this and what bearings do i need for the bottem end, does any 1 know where i can get a surge tank round 1.5 lt tank under $200 thats just f**k.en nuts help me do the XF 250 PROUD
_________________ EFBIGNIK 145.9 RWKW Falcon / 16.27 @ 86.72mph (Stock)
|
|||
| Top | |
|||
| xcabbi |
|
||
|
You want roller rockers? How hard do you plan on revving the thing? What are your diff gears?
|
||
| Top | |
||
| yobboford |
|
|||
|
the way you have said you want to go is the go, lol.
350 holley with a redline manifold and a good set of extractors and exhaust is your first step, dont worry about roller rockers and a huge cam, the 250 is a nice torquey engine that doesnt need to rev its tits off, get a cam to take advantage of the torque you have already got, something that works from 2000-5000 is perfect. i would go for around a 3.5:1 diff, locked of cause 
_________________ Thanks to Crescent Motors, Liverpool. |
|||
| Top | |
|||
| mitchg911 |
|
|||
|
i agree with yobbo,, thats basically whats in mine
350holley, redline manifold, extractors, zorst and a 1800-4800 cam... 9.8:1 comp... runs great.. all i need is a shorter diff and all is good.. nice torque and it revs smooth as also if its for off street remove ALL the polution gear -mitch
_________________ BF XR6T 6spd Auto. 60lb injectors, Hybrid Cooler, Custom Piping, Custom Surge Tank, Actuator. |
|||
| Top | |
|||
| ghiaman |
|
|||||
|
mitchg911 wrote: i agree with yobbo,, thats basically whats in mine
350holley, redline manifold, extractors, zorst and a 1800-4800 cam... 9.8:1 comp... runs great.. all i need is a shorter diff and all is good.. nice torque and it revs smooth as also if its for off street remove ALL the polution gear -mitch The mods you mentioned were close to the TE cortina that my son had done before the V8 conversion and that with a 3.9 diff & the head of a injected mtr run a best of I think was either a 14.8 or 14.9 ghiaman
|
|||||
| Top | |
|||||
| efbignik |
|
|||
|
xcabbi wrote: You want roller rockers? How hard do you plan on revving the thing? What are your diff gears?
*what kind of rockers? where from? who makes the best? how much ? * its got 2.92:1 LSD Diff * Are the holly 350 a good carby ? * i want Big Power i want 2 win my drags *I want it to go as hard as it can i got some cash stashed a way for this so i want 2 make it like a dream 250xflow motor
_________________ EFBIGNIK 145.9 RWKW Falcon / 16.27 @ 86.72mph (Stock)
|
|||
| Top | |
|||
| efbignik |
|
|||||
|
YOU WANNTED 2 SEE IT HERE IT IS
_________________ EFBIGNIK 145.9 RWKW Falcon / 16.27 @ 86.72mph (Stock)
|
|||||
| Top | |
|||||
| Sleeperau |
|
||
|
efbignik wrote: Hi all The rods are a weak link in the crossflow 250. Carby wise a 465cfm Holley 4 barrel will outdo the 350 anyday! but fuel wise you will know it. John Cain makes Cain manifolds or used to make them for the Xflow 250(Newcastle NSW).
what i want to do is, Do up my xf 250 crossflow i went in a burn out comp and finshed 3rd but it was still lacking power i want 2 know what i can do to a carby motor? it doesn't if it lumpy a s**t it's doesnt have 2 b street legal it's for burnouts and drags thats it's only use. i was thinkin a crow cam part no. 14770 i have put a holley 350 2brl carby on it, i dont want 2 put a snail on it of any thing like that, what kind of roller rockers and lifters do i need for this and what bearings do i need for the bottem end, does any 1 know where i can get a surge tank round 1.5 lt tank under $200 thats just f**k.en nuts help me do the XF 250 PROUD |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 70 guests |
