|
| msman |
|
||
|
is it ok to jack the entire front of the car on the back of the k frame. seen a few trye places doin it.
can i do anything to stop the k frame from gettin little dents in it, from the jack. thanks
_________________ why do u write in here. |
||
| Top | |
||
| NC 5ltr |
|
|||
|
just my opinion,but the k frame or engine cradle supports the engine youd be better off using the jack on the chassis rails as they have a broader spectrim of weight distribution,if that makes sence
_________________ "Looking at cleavage is like looking at the sun. You don't stare at it. It's too risky. You get a sense of it and then you look away."
|
|||
| Top | |
|||
| nannas_ed |
|
|||
|
{USERNAME} wrote: just my opinion,but the k frame or engine cradle supports the engine youd be better off using the jack on the chassis rails as they have a broader spectrim of weight distribution,if that makes sence
if you using a troley jack avoid jacking the car up from the sills as they can be damaged quite easily. having said that if your using a scissor jack then i would strongly advise NOT jacking the car up by the K-frame as i doubt that the scissor jack can support the entire weight of the front end
_________________
|
|||
| Top | |
|||
| Disco Frank |
|
|||
|
jakcing from teh k frame is fine man,the k frame is joined to chassis rails on both sides of the car which is a structual part of the car! i do it all the time
a trolly jack will do very little damage to this make sure u use axle stands just make sure teh park brake is on and u have the rear wheels chocked!
_________________ RIP SCOTT |
|||
| Top | |
|||
| insomniac |
|
||
Age: 42 Posts: 64 Joined: 7th Sep 2005 Ride: 96 EFII Futura Stock as a Location: Melbourne |
Might also want to use a block of wood to stop getting dints in the k frame from the trolley jack.
|
||
| Top | |
||
| msman |
|
||
|
i have just bought a workshop quality 2 tonne trolley jack as the 1400kg one was showing its age.
have also got 3 tonne jak stands. i was just curios to know if the dents in the k frame were 'bad' for it or not. question now answered so thank you
_________________ why do u write in here. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 38 guests |
