|
| greg302 |
|
||
|
anyone know how many lb these injectors are? part no. 0280 150 775 thanks
_________________ 347, crane cam, Pro topline 180 heads, Edelbrock victor efi intake, 80mm C&L maf, 75mm tb, 30lb injectors and 1/4 horse |
||
| Top | |
||
| EDXR8 |
|
|||
|
Many people believe these are 24lb but they are not. Specs are: Bosch 0-280-150-775 18.2lb @ 3bar
|
|||
| Top | |
|||
| FPV_GTp |
|
||
|
{USERNAME} wrote: Many people believe these are 24lb but they are not. Specs are: Bosch 0-280-150-775 18.2lb @ 3bar
hi question quickly ?? where do u find all the specs on the injector flow rates ??? is there a site listing them ???? cya
_________________ WANTED - Complete BTr4 and zf 6hp26 automatic transmission 6 cylinder and V8 transmission(s) suit rebuild? Drop me a PM if you can help would be greatly appreciated - thanks |
||
| Top | |
||
| EBXR8380 |
|
|||
|
Google is your friend....
. http://www.powerpage.dk/dyser.htm . .
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| EDXR8 |
|
|||
|
{USERNAME} wrote: question quickly ?? where do u find all the specs on the injector flow rates ??? is there a site listing them ????
Yeah there are a number of sites around with flow specs. I also confirmed it on the official Bosch specification sheets I have. |
|||
| Top | |
|||
| dodgie |
|
|||
|
They are rated at #24 injectors when run at about 60 psi fuel pressure, which they are designed to run at being a pintle style injector (but there more like #22lbs at 60psi)
The HSV's run them at 60psi, but injector specs always show there injector ratings at 300kpa (43.5psi) for comparison, and have them at 18.9 lbs(from memory?). So basically the money you save getting these injectors may be offset by the need for an adjustable fuel pressure regulator. But if you want to try them , I have a set of 8 775 injectors, cleaned and ready to go. You will have to tune them with the regulator on a dyno. The fuel pump would start to struggle/fail when approaching 80 psi but you shouldn't need to go that high.
_________________ ED Fairmont Ghia. |
|||
| Top | |
|||
| greg302 |
|
||
|
thanks for all the info guys i think ill just get a set of fms 24
_________________ 347, crane cam, Pro topline 180 heads, Edelbrock victor efi intake, 80mm C&L maf, 75mm tb, 30lb injectors and 1/4 horse |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 60 guests |
