Is it a hard job to replace the O ring on the steel heater hose near the power steering pump. have replaced the other side a while ago but was different. whats involved as while its out i wont have a car to get other parts if needed.

do a search, as this was brought up by another memeber not long ago, and a link was placed up explaining it step by step.

p.s. not hard just undo the bolts holding the hose and pull it out.
you will require o ring and a heater hose extension from ford, should be abt $10 all up.

cheers found it....

http://www.mypage.tsn.cc/dave/Documents/water_pump.htm