|
twr7cx |
|
|||
|
Where have people mounted the siren for there alarms? Pictures tell a thousand words... Just after some ideas and recomendations.
|
|||
Top | |
Daniel |
|
|||
|
In the engine bay, not too close to anything which gets hot or could spurt any fluids out; ie overflow tank or something..
My 1st one went on top to the right hand side of the master cyl. looking towards the windscreen; my 2nd car had it on the drivers side shock tower up the top which was ok, but seemed to get wet there from rain or washing car somehow, then new one is mounted on the same tower but on the side half under the coolant tnak, can barely see/out of way. No picture for you!
_________________ BF Typhoon, Dejavu - 6sp Auto, Leather, Sunroof, 19"s, Electric Pedals, Tint, FPV Sports Wheel, FPV Mats. |
|||
Top | |
twr7cx |
|
|||
|
souns like you ahve it were my LPG converter is, not an option for me then...
|
|||
Top | |
dvyvan |
|
||
|
Ive got mine in the engine bay up against the firewall next to the air horns
_________________ Automatics only come in assult riffles
|
||
Top | |
gravelrash |
|
||
|
mine is in the engine bay on the strut tower beside the extractors and never had a problem at all, the other is inside under the dash. when it goes off, holy F**k hell... it hurts
|
||
Top | |
sto118 |
|
|||
|
On my EF, I mounted my under the overflow just behind the bottom hose of the tank, need so adjusting, but is well out of the way and very hard to see. The second sirn (Battery Backup) is mont next to the horn, but the battery, cct board and key lock is mount in the center console.
_________________ 1995 EF WAGON: Green in colour, four wheels and one spare, a motor that runs and the best of all a steering wheel. |
|||
Top | |
madmax |
|
|||
|
ON my EA the siren was mounted behind the drivers side strut tower next to the master cylinder, i had to move it slightly to install the cruise control.
_________________
|
|||
Top | |
Blu Falc |
|
|||
|
i have a peizo siren going in under the dash and the normal one is disconnetced for some reason, floating somewhere in the engine bay
|
|||
Top | |
TerroristGHIA |
|
|||
|
I mounted mine next to the factory horns in the front of the bumber bar, was a tight fit, but produces plenty of noise there
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
Top | |
EBII92 |
|
|||
Age: 39 Posts: 637 Joined: 25th Nov 2004 Ride: Toyota Surf, EF Fairmont Location: Melbourne, Northern Suburbs |
dvyvan wrote: Ive got mine in the engine bay up against the firewall next to the air horns
same with me above the airhorns no problems with it there at all. |
|||
Top | |
DjeMz |
|
||
|
good thread..
im getting my viper installed some time next week.. The drivers side strut tower it is! |
||
Top | |
data_mine |
|
|||
|
Just to be different, drivers side strut tower. Extractors (ie. no heat shield) haven't seem to have affected it adversely.
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
Top | |
camh1980 |
|
||
|
Mine was mounted near the overflow tank - so if someone was to steal something from the engine bay, they would cop an earful!
_________________ Instant Karma is gonna get you! |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 39 guests |