|
| DjeMz |
|
||
|
the supercharger... i saw on some site that u can get the 25 psi 1... I come from a turbo background (r32 gtst) can u get a boost controller for the supercharger and boost it up? or do u pyshically need to change something?
|
||
| Top | |
||
| EDXR8 |
|
|||
|
For superchargers you just need to change the pulley size, a smaller pulley will spin the blower quicker therefore produce more boost. The Vortech V1/V2's will go to around 20psi (if you really need to) or about 1000cfm which is enough to support 680hp.
|
|||
| Top | |
|||
| DjeMz |
|
||
|
ahhh
Supercharger = no lag? |
||
| Top | |
||
| ute302 |
|
||
|
so the 200kw motor came with roller rockers any know where ford soursed them from??
|
||
| Top | |
||
| EDXR8 |
|
|||
|
{USERNAME} wrote: so the 200kw motor came with roller rockers any know where ford soursed them from??
The roller rockers used in the 200kw engines are branded Ford but made by Crane. Ford has used crane to manufacture their roller rockers for years. |
|||
| Top | |
|||
| DjeMz |
|
||
|
wtf is a rocket roller?
like i said, i come from a turbo background, i can write u a 700 word essay on turbo flutter lol |
||
| Top | |
||
| -clampy- |
|
||
|
the 220kw motors had headwork and bigger valves..
_________________ current ride: worn out chuck taylors |
||
| Top | |
||
| -clampy- |
|
||
|
roller rocker is only relevant on a pushrod engine.. it sits on top of the head and its what levers between pushrod and the valve stem..(coz the pushrod is more or less paralell to the valve stem and when the pushrod comes up the valve has be pushed down)
roller rockers(as opposed to standard rockers) have little rollers where they touch the valve instead of just plain metal rubbing there..
_________________ current ride: worn out chuck taylors |
||
| Top | |
||
| DjeMz |
|
||
|
ahh k cool. is it a big job to replace these? how much roughly..
|
||
| Top | |
||
| -clampy- |
|
||
|
^ sorry to post whor but im laszy. ^
dj theres pics and sales blurb here : http://www.yellaterra.com.au/roller.php should give you an idea...
_________________ current ride: worn out chuck taylors |
||
| Top | |
||
| -clampy- |
|
||
|
its a DIY job... about the easiest thing to do involving oiled parts.. coz on a ford v8 the most you have to take off is the upper intake(just make sure no debris falls down there) and the rocker covers..
_________________ current ride: worn out chuck taylors |
||
| Top | |
||
| DjeMz |
|
||
|
i think i understand
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 16 guests |
