|
devil |
|
||
Age: 39 Posts: 98 Joined: 31st Jan 2005 Ride: Au Falcon with TE50 Bodykit Location: Melbourne |
Hi Guys
Just Upgraded from the factory AU HU to a Clarion, with an MTX Amp and 12 inch JL Audio sub. Have noticed that all the lights seem to go dim when the sub kicks in. Any ideas what i can do to stop this as it is really annoying. Im running 4 guage + and - wires to the amp Thoughts??
_________________ What do you call a holden with twin exhaust pipes?>>>>>>>> A WHEEL BARROW .....LOL |
||
Top | |
Andrew J |
|
|||
|
Try a nice big capacitor.
_________________ The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?
|
|||
Top | |
nannas_ed |
|
|||
|
yeh sounds like your sub/amp package is suking alot of juice from the charging system. if your funds are short try turning the gains down a bit till you can afford a capacitor.
_________________ |
|||
Top | |
bfturb |
|
||
|
most of the time ya dont need a cap just run another same size wire from the body of the car to the (-) neg of the battery and that will make a world of difference maybe your battery is also on its way out
_________________ No dose No Care |
||
Top | |
Smackdown |
|
|||
|
The only cable that goes from chassis to neg terminal is about 16gauge (tiny).
Run a nice big 0 gauge cable to the neg terminal from the chassis. Thats what I did and it helped but not enough so it was cap time! 1 farad should do it...
_________________ BA Falcon Futura on EGas. Stock as...
|
|||
Top | |
bfturb |
|
||
|
i have some caps here pm me if you want a price
_________________ No dose No Care |
||
Top | |
sik mk1 cortina |
|
||
|
everything used to flash on my ea, couldnt turn it up for too long without it goin because it would drain it, crap battery didnt help
_________________ Nice, but do they make em for Men? |
||
Top | |
data_mine |
|
|||
|
Does you're 4g - wire from teh amp go all the way back to the batt? or is it earthed nearby. It's recommended to keep the earth wires as short as possible, earth them to a large bolt (seats, boot mounts etc. are options)
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
Top | |
turbofairmont |
|
||
|
a quick and easy thing to do is run a nother negative wire from your amp/ capacitor sound you ahve double the amount of negative feed and it stops the dimming of lights or if you want a better option i'll explain. a cars negative wire is a 16 g wire and your amp wire is most likely a 4g wire. if you make another negative wire from your battery make sure its a 4g and hook it up to the chassis (a safe spot) it shall do the same thing. by the way this has not been done personally but was done by a mate of mine.
_________________ FORD 1996 EF FAIRMONT ARGON SILVER |
||
Top | |
Smackdown |
|
|||
|
{USERNAME} wrote: Does you're 4g - wire from teh amp go all the way back to the batt? or is it earthed nearby. It's recommended to keep the earth wires as short as possible, earth them to a large bolt (seats, boot mounts etc. are options)
If you want to go back to the battery (which is better) you should just use a thick cable. so in your case 2 or 0 gauge for earth instead of 4 gauge, its expensive tho.
_________________ BA Falcon Futura on EGas. Stock as...
|
|||
Top | |
fritzz |
|
|||
|
you dont go back to the battery with eath. most audio companys will say no longer than 50cm.
_________________ # 1997 EL Falcon GLI - 600+rwkw |
|||
Top | |
Smackdown |
|
|||
|
Ask pyroay wheather he goes back to the battery.
Although he probably has a boot mount. Resistance is related to 3 things: Length, Thickness and material. So if you raise the thickness you can easily have a higher length of cable without any issues. Going back to the battery with a high gauge cable insures that you don't have electrical noise.
_________________ BA Falcon Futura on EGas. Stock as...
|
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 48 guests |