|
| Slick |
|
|||
|
Blazing EF wrote: ok now im so bloody confused its not funny custom made extractors then If the LPG converter is in the way. or relocate the converter forward, fabricate a sheet of metal as heat shield{attach to lpg converter} facing extractor. keep the factory aluminium heat shield from old exhaust manifold & bolt it back on.
Ok my motor is a stage 5 motor from ITS Performance (thanks again mark) and its time for the exhaust and extractors. now im putting the no comp pacies as the comps wont fit there with the lpg converter so thats ok but as far as exhaust goes im lost. What would be the best exhaust for that motor and extractors as money is no issue on my baby  Cheers sureflo exhaust is another good brand. check the comparison with the redback on the dyno sheet.
_________________ Mind f**k!!! it works on feeble minded ignorant sheeples... there's plenty of em on this site... some are very intelligent but by god they are so thick!!! Pakrat wrote: You can buy them seppertly
|
|||
| Top | |
|||
| nathen |
|
||
|
mate try liverpool exhuast
|
||
| Top | |
||
| javier86 |
|
||
|
for the cat bak if its got mandrel bends and straight throu mufflers then your on the right track
_________________ AU II Fairlane Ghia 180 hp@ the wheels, Pacemaker 4499, RedBack 2.5", stock CAT, CAI, Lovells low's. More to come |
||
| Top | |
||
| twr7cx |
|
|||
|
why won't the comps fit? if your lpg converter is in the comon spot there should easily be more than enough room! mines on gas and it's no were near it, most Falcons that i've seen on gas have the converter in the same spot.
i put the factory heat shield on aswell, just bent it a bit to fit over the pacey comps. works well. |
|||
| Top | |
|||
| Steady ED |
|
|||
|
My converter is mounted on the front left strut, up high.
Where is yours to make pacey comps a non-fit? I'd just move the converter if I were you, like twr7cx said. edit: Front RIGHT I mean, before someone picks up on that 
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw Last edited by Steady ED on Wed Oct 12, 2005 2:07 pm, edited 1 time in total. |
|||
| Top | |
|||
| Blazing EF |
|
||
|
yeah the converter is on the left strut but mark said that the comps wont fit.
ok so as long as its 2.5 mandrel bent its all good. Are there any better brands than lukey and redback though. also since its a stage 5 engine y cant i got 3 ' as i want a deeper note cheers |
||
| Top | |
||
| Big Kev |
|
|||
|
Mate theres certaonly no reason why u cant go a 3"
_________________ For Sale: 25 Farad Rockford Fosgate Competition Series Carbon Cap, more to come - pm me if interested |
|||
| Top | |
|||
| Blazing EF |
|
||
|
yeah but ive heard that it will actually give less performance
basically i just want the best exhaust money can buy for the engine as i want to do it right the first time |
||
| Top | |
||
| Steady ED |
|
|||
|
A 2.5" mandrel bent system, with straight through mufflers will suit you fine.
Lukey, redback, make good mufflers. The mandrel bent pipe is much of a muchness. A single straight through muffler will flow f**k, and sound mean (possibly only semi-legal though )
On the 3", I'm getting deja vu, cause theres a thread where we were just discussing it. It probably won't make you LESS power per se, it's just that it's not the 'done thing'. It's not needed for anything under 200rwkw (so by default, not the N/A 6) IMO. It's better to stick with the tried and true 2.5" mandrel bent, IMHO.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| BNKRBR |
|
||
|
look man why dont u give jim mock a call or email him he knows everything there is to know about these cars tell him whats going on and he will tell u what he thinks thats what i think.
but i think genraly for better sound its got to do with the mufflers and for better flow the diamiter of the pipe and the number of mufflers. everything should be mandrel bent and straight threw. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 83 guests |
