|
pkr |
|
|||
|
This is something I have heard from a friend, if anyone can give proven info it would be great.
V8 supercars use a control tyre that is identical for both makes. Is tyre roll out different if a tyre is compressed more? My friend says that ave$co has allowed the crummies to have upto 8% leway on pit lane speed limiting because the falcon is heavier thus flattens the contact more hence more roll out. I feel this is hog wash as the perimeter is still the same unless it streches or is pushed in to a point where it folds and overlaps. For eg if you get a rope that was say 1m long and you made a circle from it it still will have a 1m length. If you flatten it in one area it is still the same length. So what is this crap of different roll out's if ave$co are inforcing this rule. If you inflate a tyre to a point where it balloon's if will increase diameter as it will strech, but it would be of no advantage as it would give less contact and would not absorb track irregularities as good. And 8% works out to 3.2kph more for the crummies. The Fords (Ambrose and Lowndes) don't even need to exceed this 40kph limit to get penalised (Oran Park) . The crummies can do 43.2kph and don't get penalised . |
|||
Top | |
JOSE |
|
|||
|
with AVESCO and favourtism, anythings possible
_________________ Because i can. |
|||
Top | |
twr7cx |
|
|||
|
But theyre using low profile tyres I wouldn't of thought that there was enough tyre there to be able to make much of a difference.
|
|||
Top | |
Punnisher_42 |
|
|||
|
Taken from HRT.com and SBR.com
Holden: Vehicle Weight: 1350kg (category minimum) Falcon: Vehicle Weight: 1350kg (category minimum) So at least that part is a load of baloney. mmm baloney. I'm off to make me a sandwich..
_________________ Regards, |
|||
Top | |
msman |
|
||
|
the only thing different in v8 super cars is the shell, apart from that they have very strict rules in terms of weight, suspension design etc.
so this is just a rumour someone made up.
_________________ why do u write in here. |
||
Top | |
Punnisher_42 |
|
|||
|
Just another point i had, if weight differences were real, and this roll out did cause the tyres to flatten out, then they would be running slightly higher pressures to counteract that
_________________ Regards, |
|||
Top | |
fordgt290 |
|
||
|
yeah holden and ford in the v8s are the same. f**k all difference between them.
remember that there pit speed is 40km/h. even if there rolling diamiter was different, there speed limiters would be calabrated to the 40km/h so it wouldnt make any diffrence. but all cars weigh nearly the same in the v8s anyway |
||
Top | |
Disco Frank |
|
|||
|
tyres CAN "grow" so to speak
only with high wheel rpm and soft pressures look at a the funny cars rear tyres when they do a burnout the expand something cruel! the tyre moves in from teh sidewalls and expands outwards increasing the overall diamter ie goses from O to ()
_________________ RIP SCOTT |
|||
Top | |
Gaz |
|
||
|
we talking bout tyres or ur a** frank?
ok too far
_________________ 2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows |
||
Top | |
Aaron_EF8 |
|
||
|
Also, you need to remember that CAMS use laser guns to check the speeds, tyre roll-out/growth isnt going to effect the reading on the laser gun.
|
||
Top | |
Disco Frank |
|
|||
|
Gaz wrote: we talking bout tyres or ur a** frank?
ok too far yes too far for the record i have a nice a**
_________________ RIP SCOTT |
|||
Top | |
Interceptor |
|
||
|
Disco Frank wrote: for the record i have a nice a**
is that what your boyfriend keeps telling you?
_________________ Banned |
||
Top | |
Disco Frank |
|
|||
|
Interceptor wrote: Disco Frank wrote: for the record i have a nice a** is that what your boyfriend keeps telling you? no this from females btw you are only gay if u have taken it up the a** which i have not
_________________ RIP SCOTT |
|||
Top | |
Punnisher_42 |
|
|||
|
oh gawd.
Man you guys have problems. Could have sworn this was the motoring and motorsport forum. D.F. and Interc. = > STFU
_________________ Regards, |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 26 guests |