|
creeture3 |
|
||
|
I would like to get hold of an engine for an EL. It must be a hybrid. All I require is the block c/w pistons, rods, crank, and timing gears, timing cover, sump, head with rockers. Maybe someone can help? I live in Melbourne, but will travel (a bit) to buy. I don't want anything that has had spun bearings or oil starved head/crank please. Rods out the side also not considered.
|
||
Top | |
eelzy |
|
||
|
i have an xf with xh 1996 xr6 motor ss headers 2.5 exuast monza seats engine good $2500
|
||
Top | |
creeture3 |
|
||
|
no. too much. All I want is a bare motor I can play with.
|
||
Top | |
efutura5spd |
|
|||
|
iv got an el block with an eb head i u wnt.
_________________ car audio gear just ask, special prices for fm members... |
|||
Top | |
creeture3 |
|
||
|
I wouild like to keep the hybrid configuration, as I have a hybrid motor already. I want to try some porting etc., and take time to do it while i am still driving the car. I can see this project taking anything up to 6 months or more. I am in no rush. Anyway, NSW would be a bit hard to get the motor from. Thanks for the offer anyway. As I said, I am not in a hurry
|
||
Top | |
efutura5spd |
|
|||
|
no pbs.
_________________ car audio gear just ask, special prices for fm members... |
|||
Top | |
twase |
|
|||
|
{USERNAME} wrote: I wouild like to keep the hybrid configuration, as I have a hybrid motor already. I want to try some porting etc., and take time to do it while i am still driving the car. I can see this project taking anything up to 6 months or more. I am in no rush. Anyway, NSW would be a bit hard to get the motor from. Thanks for the offer anyway. As I said, I am not in a hurry Hybrid would be few and far between,
either get a tired EF/L motor and swap it and do yours up or get an AU but you need to modify a few things to get it to fit. Cheers TW.
_________________ BF Fairmont Ghia Series II update. |
|||
Top | |
creeture3 |
|
||
|
I know hybrids are as rare as rocking horse poop, but I have a couple of wreckers looking, and as I said, I'm not in a hurry, I can wait. It's gotta be an EL for the distributor. I have thought about EB head, as I know they flow better, but I have decided to stick with the AU head.
The other altenative of course is to find a tired EL motor, and a tired AU head. That would probably do too. But I think the hybrids had the AU crank, which I think has more, or bigger, mains. I may be entirely wrong about that tho' |
||
Top | |
twase |
|
|||
|
{USERNAME} wrote: I know hybrids are as rare as rocking horse poop, but I have a couple of wreckers looking, and as I said, I'm not in a hurry, I can wait. It's gotta be an EL for the distributor. I have thought about EB head, as I know they flow better, but I have decided to stick with the AU head.
The other altenative of course is to find a tired EL motor, and a tired AU head. That would probably do too. But I think the hybrids had the AU crank, which I think has more, or bigger, mains. I may be entirely wrong about that tho' The cam angle sensor in the EF can be removed and the distributor put in so an EF will be OK. Cheers TW.
_________________ BF Fairmont Ghia Series II update. |
|||
Top | |
creeture3 |
|
||
|
I didn't think of that!! One learns something every day. makes sense though
|
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 29 guests |