Hey guys
i got a tighe cam from ebay for my 250 crossflow
i was after a huge cam for my car which i found but im starting to worry about the cam because i think i have to get a new crank or machine the crank to work with the cam

The cam is the 140HT
http://tighecams.com.au/profiles2/fordcrosshyd.htm

If anyone could help me with this issue this would be excelent


Also one thing before i go who know a good place to get a 20thou bore on a 250 xflow i got the pistons and rings for it just need the bore and i got my rebuild kit and getting the new bearing for the motor too and i also got a sport timming chain with cogs for the motor too

I want to mod the car a little to have some power

Thx Jason